MLH Datasheet, PDF (1/1 Pages) MMD Components – Ceramic J-Lead HCMOS/TTL Oscillator

MLH SERIES – Ceramic J-Lead HCMOS/TTL Oscillator
¾ Hermetically Sealed Ceramic SMD
Package
¾ Wide Frequency Range
¾ Available to -55°C to +125°C Operating
¾ RoHS Compliant Available
ELECTRICAL SPECIFICATIONS:
Frequency Range
1.000MHZ to 70.000MHZ
Frequency Stability (Inclusive of Temp., Load, Voltage and Aging)
(See Part Number Guide for Options)
Operating Temp.Range
(See Part Number Guide for Options)
Storage Temp. Range
-55°C to +125°C
Waveform
HCMOS
TTL
Logic “0”
10% Vdd max
0.5V max
Logic “1”
90% Vdd min
2.5V max
Symmetry
40%/60% Optional 45%/55%
50% of wavefrom w/HCMOS Load
40%/60% Optional 45%/55%
1.4Vdc w/TTL Load
Load
+3.3VDC =5 TTL or 30 pF max / +5.0VDC = 10 TTL Gates or 50pF Load max
Rise / Fall Time (20% to 80%)
10 nSec max
Start Time
10 mSec min
Supply Voltage (Vdd)
+3.3 VDC ±10%
+5.0 VDC 10%
Jitter
Option 1 = 1 pSec typ / Option P = 10 pSec typ
Supply Current Chart
Frequency Range
Current
Supply
Frequency Range
Current (mA)
Supply
1.000MHZ to 25.000MHz
9mA max
+5.00 VDC
1.000MHZ to 30.000MHz
10mA max
+3.3 VDC
25.000MHZ to 40.000MHZ
20mA max
+5.00 VDC
30.000MHZ to 50.000MHZ
20mA max
+3.3 VDC
40.000MHZ to 70.000MHZ
30mA max
+5.00 VDC
50.000MHZ to 70.000MHZ
30mA max
+3.3 VDC
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS:
Humidty
Hermetic Seal
Solderability
Reflow Solderability
Vibration
Shock
MIL-STD-883
85% RH, 85°C, 48 Hours
Leak Rate 2 X 10^-8 ATM-cm³/sec max
MIL-STD-202G, Method 208
260°C for 10 seconds
MIL-STD-202G, Method 204 35G, 50 to 2000 Hz
MIL-STD-202G, Method 203 Test Cond E, 1000G’s, ½ Sinewave
Available with Level B Screening
MECHANICAL DIMENSIONS:
9.80 [.386]
MAX
4.70 [.185]
MAX
14.00 [.551]
MAX
0.84 [.033]
5.08 [.200]
DENOTES PIN 1
Dimension in Brackets are in Inches
External Bypass Capacitor is Recommended
PART NUMBERING GUIDE:
ML
H
Ceramic SMD 4 J-Lead
7.87 [.310]
23
14
5.08 [.200]
7.62 [.300]
2.50 [.098]
1.02 [.040]
PIN CONNECTIONS
PIN 1 TRI-STATE
PIN 2 GROUND
PIN 3 OUTPUT
PIN 4 SUPPLY VOLTAGE
Recommended
Land Pattern
Frequency
Output
H = HCMOS
RoHS Compliant
Blank = Not Compliant
F = is Compliant
Supply Voltage
5 = +5.0VDC
3 = +3.3VDC
Frequency
Stability
020 = ±20 ppm
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
Operating Temperature
Blank = 0°C to +70°C
27 = -20°C to +70°C
48 = -40°C to +85°C
55 = -55°C to +125°C
Symmetry *
Blank = 40/60%
A = 45/55%
B = 47.5/52.5%
Pin 1 Connection
Blank = No Connection
H = Tri-state
Option B (47.5/52.5%) Avaible up to 50MHz only
Please Consult with MMD Sales Department for any other Parameters or Options
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: [phone], Fax: [phone], www.mmdcomp.com
[e-mail]
Jitter
1 = 1 pSec typ
P = 10 pSec typ
Specifications subject to change without notice
Revision MLH021908E