MIL2 Datasheet, PDF (1/2 Pages) MMD Components – 5mm x 7mm 6 Pads Ceramic Package

MIL & MIV Series 5X7 Ceramic SMD Oscillator
Frequency
Frequency Stability
Aging
Operating Temperature Range
Storage Temperature Range
Supply Voltage (Vdd)
Supply Current
Output Voltage Logic “0” (Vol)
Output Voltage Logic “1” (Voh)
Symmetry (at 50% of wave form)
Rise / Fall Time (20% to 80%)
Phase Jitter
Load Drive Capacity
Enable / Disable Function
Positive Enable / Disable
Negative Enable / Disable
 5mm x 7mm 6 Pads Ceramic Package
 Negative Enable Available
 Wide Frequency Range
 LVPECL or LVDS Output
LVPECL
19.440 MHz to 1.000GHz
LVDS
(See Part Number Guide for Options)
±3ppm First Year max
(See Part Number Guide for Options)
-55°C to +125°C
+2.5 VDC ±5%
+3.3 VDC ±5%
+2.5 VDC ±5%
+3.3 VDC ±5%
65mA max
80mA max
45mA max
Vdd - 1.620Vdc max
1.43V typ
Vdd - 1.025Vdc min
1.10V typ
(See Part Number Guide fro Options)
1nSec max
1pSec at 12KHz to 20.000MHZ
50Ω
50Ω
(See Part Number Guide for Options)
Voh = 70% of Vdd min to Enable Output
Vol = 30% max or grounded to Disable Output (High Impedance)
Voh = 70% of Vdd min to Disable Output (High Impedance)
Vol = 30% min or No Connect to Enable Output
Mechanical & Environmental Detail
Marking Detail
Shock
Solderability
Solvent Resistance
Vibration
Gross Leak Test
Fine Leak Test
MSL
MIL-STD-883, Method 2002 Cond B
MIL-STD-883, Method 2003
MIL-STD-202, Method 215
MIL-STD-883, Method 2007, Cond A
MIL-STD-883, Method 1014, Cond C
MIL-STD-883, Method 1014, Cond A2
Level 1 per IPC/JEDEC J-STD 20
Line 1 = MXXXXX
M ⁼ MMD
XXXXX ⁼ Frequency in MHZ
Line 2 = SYYWWL
S=
YYWW ⁼
L=
Internal Code
4 Digit Date Code (Year /
Week)
Denotes RoHS Compliant
Line 3 = XXXXX
Internal use only
May vary with lots
Black dot to denote Pin 1
MMD MONITOR/QUARTZEK – An ILSI Company,
5458 Louie Lane, Reno, NV 89511
Phone: [phone], www.mmdcomp.com
Subject to change without notice
Revision:
10’24/13 P
Pg 1 of 2