MAP Datasheet, PDF (1/1 Pages) MMD Components – Industry Standard Package

MAP, MAL, and MAV Series
ELECTRICAL SPECIFICATION:
¾ Industry Standard Package
¾ Wide Frequency Range
¾ RoHS Compliant Available
¾ Less than 1 pSec Jitter
Frequency Range
Frequency Stability*
Operating Temp.Range
Storage Temp. Range
Aging
Logic “0”
Logic “1”
Supply Voltage (Vdd)
Supply Current
2.5VDC ± 5%
3.3VDC ± 5%
5.0VDC ± 5%
Symmetry (50% of waveform)
Rise / Fall Time (20% to 80%)
Load
Start Time
Phase Jitter (12kHz to 20MHz)
Tri-State Operation
* Inclusive of Temp., Load, Voltage and Aging
LVDS
LVPECL
PECL
12.500MHz to 800.000MHZ
(See Part Number Guide for Options)
(See Part Number Guide for Options)
-55°C to +125°C
±5 ppm / yr max
1.43V typ
Vdd – 1.620 VDC max
Vdd – 1.620 VDC max
1.10V typ
Vdd- 1.025 vdc min
Vdd- 1.025 vdc min
50 mA max
50 mA max
N/A
60 mA max
60 mA max
N/A
N/A
N/A
140 mA max
(See Part Number Guide for Options)
2nSec max
50 Ohms into Vdd-2.00 VDC
10mSec max
Less than 1 pSec
Vih = 70% of Vdd min to Enable Output
Vil = 30% max or grounded to Disable Output (High Impedance)
MECHANICAL DIMENSIONS:
20.70 [.815]
MAX
5.08 [.200]
MAX
13.10 [.516]
MAX
5.08 [.200]
2.54 [.100]
89
7
.46 [.018]
Black Dot to Denote Pin 1
DIMENSIONS IN BRACKETS ARE IN INCHES
EXTERNAL BYPASS CAPACITOR IS RECOMMENDED
15.24 [.600]
14
7.62 [.300]
1
OPTIONAL PIN
PART NUMBERING GUIDE:
M
FREQUENCY
A PACKAGE OPTION
PIN 1
NC, TRI-STATE OR
COMPL. OUTPUT
PIN 7
CASE GROUND
PIN 8
OUTPUT
PIN 14 SUPPLY VOLTAGE
5A PACKAGE OPTION
PIN 1
TRI-STATE
PIN 7
CASE GROUND
PIN 8
OUTPUT
PIN 9 COMPL. OUTPUT
PIN 14 SUPPLY VOLTAGE
Package Options
A = 14DIP/4
5A = 14DIP/5 (Pin 9)
Output
P = PECL
L = LVPECL
V = LVDS
Supply Voltage
2 = +2.5 VDC
3 = +3.3 VDC
5 = +5.0 VDC
Frequency
Stability
020 = ±20 ppm
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
Pin 1 Connection
Blank = No connection
C = Compl. Output
H = Tri-state*
Operating
Temperature
Blank = 0°C to +70°C
48 = -40°C to +85°C
Please Consult with MMD Sales Deparment for any other Parameters or Options
* Pin 1 Connection must be Tri-state when using Pin 9 option.
Symmetry
Blank = 40%/60%
A = 45%/55%
Value Added Options
Blank = No Added Options
G = Gull-Wing
CLXXX = Cuts Lends
XXX = Lead Lenght
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: [phone], Fax: [phone], www.mmdcomp.com
[e-mail]
Specifications subject to change without notice Revision MAP060607H