IM890 Datasheet, PDF (1/10 Pages) ILSI America LLC – Pb-free, RoHS and REACH compliant

MEMS Ultra-Low Power Oscillator, 32.768 kHz Quartz XTAL Replacement
IM890 Series
33Features:
 MEMS Technology
 Small SMD package: 2.0 x 1.2 mm (2012)
 Fixed 32.768 kHz output frequency
 NanoDrve^TM programmable output swing for lowest power
 Pb-free, RoHS and REACH compliant
Typical Applications:
 Mobile Phones
 Tablets
 Health and Wellness Monitors
 Wireless Keypads
 Ultra-Small Notebook PC
Fixed Output Frequency
Frequency Tolerance^[1]
Frequency Stability^[2]
Aging +25°C ±2°C
Operational Supply Voltage
Core Operating Current ^[3]
Output Stage Operating Current^[3]
Power-Supply Ramp
Start-up Time at Power-up ^[4]
Electronic Specifications:
32.768 kHz
±20 ppm max
±75 ppm max
±100 ppm max
±250 ppm max
±1 ppm max
T_A = +25°C, Post Reflow, Vdd: 1.5V – 3.63V
T_A = -10°C to +70°C Vdd: +1.50V to +3.63V
T_A = -40°C to +85°C, Vdd: +1.50V to +3.63V
T_A = -10°C to +70°C, Vdd: +1.20V to+1.50V
1^st Year
+1.20V min, +3.63 V max
+1.50V min, +3.63 V max
0.90 µA typ.
1.30 µA max
1.40 µA max
0.065 µA/Vpp typ.
0.125 µA/Vpp max
T_A = -10°C to +70°C
T_A = -40°C to +85°C
T_A - +25°C, Vdd: +1.80V No load
T_A = -10°C to +70°C, Vdd max, +3.63V No load
T_A = -40°C to +85°C, Vdd max, +3.63V No load
T_A = -40°C to +85°C, Vdd: 1.5V – 3.63V. No load
100 mSec max
180 mSec typ., 300 ms max
450 mSec max
T_A = -40°C to +85°C, 0 to 90% Vdd
T_A = -40°C ≤ TA ≤ +50°C, valid output
T_A = +50°C < TA ≤ +85°C, valid output
Notes:
1. Measured peak-to-peak. Tested with Agilent 53132A frequency counter. Due to the low operating frequency, the gate time must be ≥100 ms to
ensure an accurate frequency measurement.
2.Stability is specified for two operating voltage ranges. Stability progressively degrades with supply voltage below 1.5V. Measured peak-to-
peak. Inclusive of Initial Tolerance at 25°C, and variations over operating temperature, rated power supply voltage and load.
3.Core operating current does not include output driver operating current or load current. To derive total operating current (no load), add core
operating current + (0.065 µA/V) * (peak-to-peak output Voltage swing).
4.Measured from the time Vdd reaches 1.5V.
Output Rise / Fall Time
LVCMOS Output Option, T_A = -40°C to +85°C,, typical values are at T_A = +25°C
100 nSec typ. 200 nSec max 10-90% (Vdd), 15 pF load, Vdd = 1.5V to 3.63V
50 nSec max
10-90% (Vdd), 5 pF load, Vdd ≥ 1.62V
Symmetry
48/52% min/max
Logic “1”
90% min
Vdd: 1.5V – 3.63V. IOH = -10 μA, 15 pF
Logic ‘0”
10% max
Vdd: 1.5V – 3.63V. IOH = -10 μA, 15 pF
NanoDrive^TM Programmable, Reduced Swing Output
Output Rise / Fall Time
200 nSec max
30-70% (VOL/VOH), 10 pF Load
Symmetry
48/52% min/max
AC-coupled Programmable Output
Swing
0.20 V to 0.80 V typ.
Vdd: 1.5V – 3.63V, 10 pF Load, IOH / IOL = ±0.2 μA.
IM890 does not internally AC-couple. This output description is
intended for a receiver that is AC-coupled. See Table 2 for
acceptable NanoDrive swing options.
DC-Biased Programmable Output
Voltage High Range
0.60 V to 1.225 V typ.
Vdd: 1.5V – 3.63V. IOH = -0.2 μA, 10 pF Load.
See Table 1 for acceptable VOH/VOL setting levels
DC-Biased Programmable Output
Voltage High Range
0.35 V to 0.80 V typ.
Vdd: 1.5V – 3.63V. IOL = 0.2 μA, 10 pF Load.
See Table 1 for acceptable VOH/VOL setting levels.
Programmable Output Voltage
Swing Tolerance
Period Jitter
±0.055 V max
35 nSec_RMS typ.
TA = -40°C to +85°C, Vdd = 1.5V to 3.63V.
Cycles = 10,000, TA = 25°C, Vdd = 1.5V – 3.63V
ILSI America Phone [phone] ● Fax [phone] ●email: [e-mail] ●
www.ilsiamerica.com
Specifications subject to change without notice
Page 1 of 10
Rev 05/17/16_B
Page 1 of 10