IM810B Datasheet, PDF (1/8 Pages) MMD Components – MEMS Oscillator, Ultra Performance, LVCMOS/HCMOS Compatible, 1.00 MHz to 80.00 MHz

MEMS Oscillator, Ultra Performance, LVCMOS/HCMOS Compatible, 1.00 MHz to 80.00 MHz IM810 Series
Features:
 MEMS Technology
 Direct pin to pin drop-in replacement for industry-standard packages
 Ultra-low phase jitter: 0.5 pSec (12 kHz to 20 MHz)
 LVCMOS/HCMOS Compatible Output
 Industry-standard package 2.5 x 2.0, 3.2 x 2.5, and 5.0 x 3.2 mm x mm
 Pb-free, RoHS and REACH compliant
 Fast delivery times
Typical Applications:
 Fibre Channel
 Server and Storage
 GPON, EPON
 100M / 1G /10G Ethernet
Electrical Specifications:
Frequency Range
1.000 MHz to 80.000MHz
Frequency Stability
See Part Number Guide
Inclusive of Initial Tolerance, Operating Temperature Range, Load, and Voltage.
First Year Aging
±1.5 ppm
At + 25ºC ±2ºC
10 Years Aging
±5.0 ppm
At + 25ºC ±2ºC
Operating Temperature
See Part Number Guide
Supply Voltage (Vdd) ±10% See Part Number Guide
Current Consumption
31 mA typ./ 33 mA max
29 mA typ./ 31mA max
No load condition, F = 20 MHz, Vdd = +2.5 V, +2.8 V or +3.3 V
No load condition, f = 20 MHz, Vdd = +1.8V
OE Disable Current
31 mA max
30 mA max
Vdd = +2.5 V, +2.8 V or 3.3 V, OE = GND
Vdd = +1.8 V, OE = GND
Standby Current
70 µA max
10 µA max
Vdd = +2.5 V, +2.8 V or 3.3 V, ST = GND
Vdd = +1.8 V, ST = GND
Waveform Output
LVCMOS/HCMOS
Symmetry
45%/55%
50% of waveform
Rise / Fall Time
1.2 nSec typ./ 2.0 nSec max 15 pF Load, 10% to 90% of Vdd
Logic “1”
90% of Vdd min
Logic “0”
10% of Vdd max
Input Voltage High
70% of Vdd min
Pin 1, OE or ST
Input Voltage Low
30% of Vdd max
Pin 1, OE or ST
Input Pull-up Impedance
100 kΩ typ./ 250 kΩ max
2.0 MΩ min
Pin 1, OE logic high or logic low, or ST logic high
Pin 1, ST logic low
Startup Time
7 mSec typ./ 10 mSec max Measured from the time Vdd reaches its rated minimum values
OE Enable/Disable Time
150 nSec max
F = 80 MHz, For other frequencies, T_oe = 100 nSec = 3 cycles
Resume Time
6 mSec typ./ 10 mSec max In standby mode, measured from the time ST pin crosses 50% threshold.
RMS Period Time
1.5 pSec typ./ 2.0 pSec max
2.0 pSec typ./ 3.0 pSec max F = 75 MHz, all Vdds
RMS Period Time (random) 0.5 pSec typ./ 1.0 pSec max F = 10 MHz, Integration bandwidth = 12 kHz to 20 MHz
Notes:
 All min and max limits are specified over temperature and rated operating voltage with 15pF output unless otherwise stated.
 Typical values are at +25ºC and nominal supply voltage.
Storage Temperature
Absolute Maximum Limits
Supply Voltage (Vdd)
Electrostatic Discharge
Solder Temperature (follow standard Pb free soldering guidelines)
Junction Temperature
-65ºC to +150ºC
-0.5 VDC to 4.0 VDC
2000 V max
260ºC max
150ºC max
ILSI America Phone [phone] ● Fax [phone] ●email: [e-mail] ●
www.ilsiamerica.com
Specifications subject to change without notice
Rev 01/30/16_A
Page 1 of 8