M37640E8FP Datasheet, PDF (81/96 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER

Ver 1.4
MITSUBISHI MICROCOMPUTERS
7640 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
2.2 RECOMMENDED OPERATING CONDITIONS
Table 2.2. Recommended Operating Conditions (Vcc = 4.15 to 5.25V, Vss = 0V, Ta = -20 to 85°C unless otherwise noted)
Symbol
Parameter
Limits
Min. Typ. Max.
Unit
V_CC
AV_CC
V_SS
AV_SS
V_IH
V_IH
Supply voltage
Analog supply voltage
Supply voltage
Analog supply voltage
H input voltage
H input voltage
4.15
5
5.25
V
4.15
5
V_CC
V
0
V
0
V
RESET, X_in, XC_in, CNV_SS
P0, P1, P2, P3, P4, P5, P6, P7,
P8
0.8V_CC
0.8V_CC
V_CC
V
V_CC
V
V_IH
H input voltage
P2
(When PTC6 = “0”)
0.5V_CC
V_CC
V
V_IH
H input voltage
P5₇-P5₄, P6, P7₂
2.0
(When MBI inputs and PTC7 = “1”)
V_CC
V
V_IH
H input voltage
V_IL
L input voltage
V_IL
L input voltage
USB D+, D-
2.0
RESET, X_in, XC_in, CNV_SS
0
P0, P1, P2, P3, P4, P5, P6, P7,
P8
0
3.8
V
0.2V_CC
V
0.2V_CC
V
V_IL
L input voltage
P2
(When PTC6 = “0”)
0
0.16V_CC
V
V_IL
L input voltage
P5₇-P5₄, P6, P7₂
0
(When MBI inputs and PTC7 = “1”)
0.8
V
V_IL
L input voltage
I_OL (peak) L peak output current ^{Note 1}
USB D+, D-
0
P0, P1, P2, P3, P4, P5, P6, P7,
P8
0.8
V
10
mA
I_OL (avg) L average output current ^{Note 2}
P0, P1, P2, P3, P4, P5, P6, P7,
P8
5
mA
I_OH (peak) H peak output current ^{Note 1}
P0, P1, P2, P3, P4, P5, P6, P7,
P8
-10
mA
I_OH (avg) H average output current ^{Note 2}
P0, P1, P2, P3, P4, P5, P6, P7,
P8
-5
mA
ΣΙ_OL
(peak)
L total peak output current ^{Note 3}
P0, P1, P2, P3, P4, P5, P6, P7,
P8
80
mA
ΣI_OL
(avg)
L total average
current ^{Note 4}
output
P0, P1, P2, P3, P4, P5, P6, P7,
P8
40
mA
ΣI_OH
(peak)
H total peak output current ^{Note 3}
P0, P1, P2, P3, P4, P5, P6, P7,
P8
-80
mA
ΣI_OL
(avg)
H total
current
average
Note 4
output
P0, P1, P2, P3, P4, P5, P6, P7,
P8
-40
mA
f(CNTR0) TimerX - input frequency Note 5
5
MHz
f(CNTR1) TimerY - input frequency Note 5
5
MHz
f(X_in)
f(XC_in)
Clock frequency Note 5,7
Clock frequency Note 5,6
4
24
MHz
32.768 50/5.0 KHz/MHz
Note 1.
Note 2.
Note 3.
Note 4.
Note 5.
Note 6.
Note 7.
The peak output current is the peak current flowing through any pin of the listed ports.
The average output current is an average current value measured over 100 ms.
The total peak output current is the peak current flowing throught all pins of the listed ports.
The total average output current is an average current value measured over 100 ms.
The oscillation frequency has a 50% cycle.
The maximum oscillation frequency of 50 KHz is for a crystal oscillator connected between XCin and XCout.
An external signal having a maximum frequency of 5 MHz can be input to XCin.
When using Frequency Synthesizer Circuit, minimum limit is 4 MHz. And when using USB, put internal clock
f(.)to more than 6 MHz.
81