M34282M1 Datasheet, PDF (66/70 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER

MITSUBISHI MICROCOMPUTERS
4282 Group
(6) Notes on handling
➀ A high-voltage is used for writing. Take care that overvoltage
is not applied. Take care especially at turning on the power.
➁ For the One Time PROM version, Mitsubishi Electric corp.
does not perform PROM writing test and screening in the
assembly process and following processes. In order to
improve reliability after writing, performing writing and test
according to the flow shown in Figure 32 before using is
recommended.
SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
Writing with PROM programmer
Screening (Leave at 150 °C for 40 hours) (Note)
Verify test with PROM programmer
Function test in target device
Note: Since the screening temperature is higher
than storage temperature, never expose the
microcomputer to 150 °C exceeding 100
hours.
Fig. 32 Flow of writing and test of the product shipped in
blank
MITSUBISHI
66
ELECTRIC