M61508FP Datasheet, PDF (6/22 Pages) Mitsubishi Electric Semiconductor – THE ELECTRIC VOLUME of BUILD-IN NON FADER VOLUME with TONE CONTROL

MITSUBISHI SOUND PROCESSOR ICs
M61508FP
THE ELECTRIC VOLUME of BUILD-IN NON FADER VOLUME with TONE CONTROL
ELECTRICAL CHARACTERISTICS
(Ta=25 C,VCC=8V,VDD=5V,Input Gain/Volume/Tone/fader=0dB,Loudness=OFF,unless otherwise noted.)
Symbol
Parameter
Test conditions
Limits
Unit
Min typ Max
Icc
Circuit Current
GV
Pass Gain
Volume Maximum
ATT(VOL) _{Attenuation Quantity}
Crosstalk between
ATT(VOL) _Channels
VIM
Maximum Input Voltage
G(Bass)B Boost Quantity (Bass)
No signal setting
Vi=1Vrms , f=1KHz
ATT(VOL)= - dB
ATT(VOL)= 0dB
f=1KHz , DIN-AUDIO
THD=1%
f=100Hz
40 mA
-2 0 +2 dB
-90 -80 ^dB
-2 0 +2 dB
1.8 Vrms
13 16 19 dB
G(Bass)C Cut Quantity (Bass)
f=100Hz
-15 -12 -9 dB
G(MID)B Boost Quantity (Mid)
f=1KHz
9 12 15 dB
G(MID)C Cut Quantity (Mid)
G(Tre)B ^{Boost Quantity (Treble)}
G(Tre)C Cut Quantity (Treble)
Fader Maximum
ATT (FED) _{Attenuation Quantity}
VOM ^{Maximum input voltage}
Vno 1
Vno 2
output noise voltage
f=1KHz
f=10KHz
f=10KHz
Vi=1Vrms , f=1KHz,DIN-AUDIO
ATT(FED)= - dB
f=1KHz , DIN-AUDIO
THD=1%
Rg=0,DIN-AUDIO
Bypass setting
Rg=0,DIN-AUDIO
-15 -12 -9 dB
9 12 15 dB
-15 -12 -9 ^dB
-90 -80 dB
1.8
12
5
Vrms
uVrms
Vno 3
ATT(VOL)= - dB
Rg=0,DIN-AUDIO
3.5
THD
CS
Total harmonic distortion
Channel Separation
f=1KHz,Vo=0.5Vrms
BW:400Hz to 30KHz
f=1KHz,DIN-AUDIO
0.01 0.05 %
-90 -75 dB
CT
Input Selector Crosstalk f=1KHz,DIN-AUDIO
-75 -60 dB
Gv(LOUD) ^{Loudness voltage gain}
Gv(GAIN) ^{Input gain control}
Common Mode
CMRR _{Rejection Ratio}
Loudness ON , f=100Hz
VOL1= -30dB , VOL2=0dB
10 13 16
dB
LOUD_VOL= -20dB
Gv(GAIN)= +18.75dB
15.75 18.75 21.75 dB
2,3pin/34,35pin
Common mode signal input setting
50
dB
D-61508-98-C
MITSUBISHI
ELECTRIC
( ⁶/22)