M37560MF Datasheet, PDF (54/65 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER

MITSUBISHI MICROCOMPUTERS
7560 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
Table 16 Recommended operating conditions (4) (VCC = 2.2 to 5.5 V, Ta = –20 to 85°C, unless otherwise noted)
Symbol
Parameter
Limits
Unit
Min. Typ. Max.
ΣIOH(peak) “H” total peak output current
P00–P07, P10–P17, P20–P27, P30–P37 (Note 1)
–20 mA
ΣIOH(peak) “H” total peak output current
P41–P47, P50–P57, P60–P67 (Note 1)
–20 mA
ΣIOL(peak) “L” total peak output current
P00–P07, P10–P17, P20–P27, P30–P37 (Note 1)
20 mA
ΣIOL(peak) “L” total peak output current
P41–P47, P50–P57, P60–P67 (Note 1)
20 mA
ΣIOL(peak) “L” total peak output current
P40, P71–P77 (Note 1)
80 mA
ΣIOH(avg) “H” total average output current P00–P07, P10–P17, P20–P27, P30–P37 (Note 1)
–10 mA
ΣIOH(avg) “H” total average output current P41–P47, P50–P57, P60–P67 (Note 1)
–10 mA
ΣIOL(avg) “L” total average output current P00–P07, P10–P17, P20–P27, P30–P37 (Note 1)
10 mA
ΣIOL(avg) “L” total average output current P41–P47, P50–P57, P60–P67 (Note 1)
10 mA
ΣIOL(avg) “L” total average output current P40, P71–P77 (Note 1)
40 mA
IOH(peak)
“H” peak output current
P00–P07, P10–P15, P30–P37 (Note 2)
–1.0 mA
IOH(peak)
“H” peak output current
P16, P17, P20–P27, P41–P47, P50–P57, P60–P67
(Note 2)
–5.0 mA
IOL(peak)
“L” peak output current
P00–P07, P10–P15, P30–P37 (Note 2)
5.0 mA
IOL(peak)
IOL(peak)
IOH(avg)
IOH(avg)
IOL(avg)
“L” peak output current
“L” peak output current
“H” average output current
“H” average output current
“L” average output current
P16, P17, P20–P27, P41–P47, P50–P57, P60–P67
(Note 2)
P40, P71–P77 (Note 2)
P00–P07, P10–P15, P30–P37 (Note 3)
P16, P17, P20–P27, P41–P47, P50–P57, P60–P67
P00–P07, P10–P15, P30–P37 (Note 3)
10
mA
20
mA
–0.5 mA
–2.5 mA
2.5 mA
IOL(avg)
“L” average output current
P16, P17, P20–P27, P41–P47, P50–P57, P60–P67
(Note 3)
5.0 mA
IOL(avg)
“L” average output current
P40, P71–P77 (Note 3)
10
mA
Notes1: The total output current is the sum of all the currents flowing through all the applicable ports. The total average current is an average value measured
over 100 ms. The total peak current is the peak value of all the currents.
2: The peak output current is the peak current flowing in each port.
3: The average output current is an average value measured over 100 ms.
54