M63010FP Datasheet, PDF (4/16 Pages) Mitsubishi Electric Semiconductor – SPINDLE MOTOR AND 4CH ACTUATOR DRIVER

Preliminary
MITSUBISHI SEMICONDUCTORS
M63010FP
SPINDLE MOTOR AND 4CH ACTUATOR DRIVER
6.0
(W)
5.0
4.0
3.0
2.0
1.0
0
[THERMAL DERATING]
using N-type board
using P-type board
This IC's package is POWER-SSOP,
so improving the board on which the IC
is mounted enables a large power
dissipation without a heat sink.
For example, using an 1 layer glass
epoxy resin board, the IC's power
dissipation is 2.6W at least. And it
comes to 3.6W by using an improved 2
layer board.
The information of the N, P type board
is shown in attached.
25
50
75
100
125 150
Ambient Temperature Ta (ºC)
[ELECTRICAL CHARACTERISTICS]
Common
(Ta=25ºC, 5VCC=VM4=5V,VM1=VM23=12V unless otherwise noted.)
SYMBOL
PARAMETER
Icc1 _{Supply current}
Icc2
Sleep current
Fosc
PWM carrier frequency
CONDITIONS
MIN
5VCC,VM1, VM23, VM4 current
5VCC,VM1, VM23, VM4 current under Sleep
(MU1 = MU2 =0V).
OSC : with 180pF
LIMITS
Unit
TYP
MAX
60
78
mA
0
30
µA
110
KHz
Vreg
3.3V regulator
output voltage
with -300mA load
(Reference to application circuit)
3.2
3.3
3.4
V
VinREF _{REF input voltage range}
1.0
IinREF _{REF input voltage range}
VREF=1.65V
-10
VMULO _{MUTE terminal low voltage} MU1,MU2
VMUHI _{MUTE terminal high voltage} MU1,MU2
3.0
IMU
MU1,MU2 at 5V input voltage
Mute terminal input current
3.3
V
+10
µA
0.8
V
V
500 µA
( 4 / 16)
REV990118