MH16S72PHC-7 Datasheet, PDF (32/55 Pages) Mitsubishi Electric Semiconductor – 1207959552-BIT (16777216 - WORD BY 72-BIT)SynchronousDRAM

Preliminary Spec.
Some contents are subject to change without notice.
MITSUBISHI LSIs
MH16S72PHC -7,-8, -10
1207959552-BIT (16777216 - WORD BY 72-BIT)SynchronousDRAM
AVERAGE SUPPLY CURRENT from Vdd
(Ta=0 ~70°C, Vdd = 3.3 ± 0.3V, Vss = 0V, unless otherwise noted)
Parameter
Symbol
Test Condition
Limits
(max)
-7, -8 -10
Unit Note
operating current
one bank active (discrete)
Icc1
tRC=min.tCLK=min, BL=1, CL=3
875
725 ^{mA *1}
precharge stanby current _Icc2N tCLK=15ns, CKE = H, VIH > Vcc - 0.2V, VIL < 0.2V 250
in non power-down
mode /CS>Vcc-0.2V
Icc2NS ^{CLK=L & CKE=H, VIH > Vcc - 0.2V, VIL < 0.2V 150}
all input signals are fixed.
250 _mA ^*1
150 mA ^*1
precharge stanby current
in power-down mode
/CS>Vcc-0.2V
active stanby current
burst current
auto-refresh current
Icc2P ^{tCLK = 15ns, CKE = L}
Icc2PS CLK = L, CKE = L
Icc3N ^{CKE=H, tCLK=15ns}
Icc3NS ^{CKE=H, CLK=L}
Icc4 ^{tCLK=min, BL=4, CL=3 Aall banks active}
Icc5 tRC=min, tCLK=min
self-refresh current
Icc6 CKE <0.2V
20
10
400
350
1000
2000
20
8
20 mA _*1
10 ^mA *1
400 ^{mA *1}
350 ^mA *1
1000 mA ^*1
1600
20
8
mA *1
mA
mA ^*1,2
Note1:Icc(max) is specified at the output open condition.
Note2:Low Power version
AC OPERATING CONDITIONS AND CHARACTERISTICS
(Ta=0 ~ 70°C, Vdd = 3.3 ± 0.3V, Vss = 0V, unless otherwise noted)
Symbol
Parameter
VOH(DC) High-Level Output Voltage(DC)
VOL(DC) Low-Level Output Voltage(DC)
VOIHO(ZAC HOifgf-hs-tLaereveOl uOtpuutptuCt uVroreltnatge(AC)
)VOLI(iAC) _{LInopwu-tLCeuverrleOntutput Voltage(AC)}
Test Condition
IOH=-2mA
IOL=2mA
CQLf=lo5a0tipnFg, VO=0 ~ Vdd
ICVOILHH===50-02p~mFVA, _{dIOd+L=0.23mVA}
Limits
Min. Max. ^Unit
2.4
V
0.4 V
-120 10 uAV
-100 100.08 ^uAV
MIT-DS-0300-0.0
MITSUBISHI
ELECTRIC
( 32 / 55 )
11/Jan. /1999