M16C62P Datasheet, PDF (255/349 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

Udenvdeelropment
Preliminary Specifications Rev.1.0
Specifications in this manual are tentative and subject to change.
Electrical Characteristics (Vcc1 = Vcc2 = 3V)
Mitsubishi microcomputers
M16C / 62P Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
VCC1 = VCC2 = 3V
Memory Expansion Mode, Microprocessor Mode
(Effective for setting with wait)
BCLK
RD
(Separate bus)
WR, WRL, WRH
(Separate bus)
RD
(Multiplexed bus)
WR, WRL, WRH
(Multiplexed bus)
RDY input
tsu(RDY–BCLK)
(Common to setting with wait and setting without wait)
th(BCLK–RDY)
BCLK
tsu(HOLD–BCLK)
HOLD input
th(BCLK–HOLD)
HLDA output
P0, P1, P2,
P3, P4,
P50 to P52
td(BCLK–HLDA)
Hi–Z
td(BCLK–HLDA)
Note: The above pins are set to high-impedance regardless of the input level of the
BYTE pin, PM06 bit of PM0 register and PM11 bit of PM1 register.
Measuring conditions :
• VCC1=VCC2=3V
• Input timing voltage : Determined with VIL=0.6V, VIH=2.4V
• Output timing voltage : Determined with VOL=1.5V, VOH=1.5V
Figure 1.26.14. Timing Diagram (3)
254