E702196_SH7750 Datasheet, PDF (182/237 Pages) Mitsubishi Electric Semiconductor – Hitachi Microcomputer Development Environment System SH7750 E10A Emulator

5.2.9 BREAKPOINT_CLEAR: BC
Description:
Clears software breakpoints that have been set.
Format:
bc [<address> [<address_space> [<asidopt>]]]
<address_space> = space <space>
<asidopt> = asid <asid>
Table 5.10 BREAKPOINT_CLEAR Command Parameters
Parameter
Type
Description
<address>
Numerical value
Breakpoint address
<space>
Keyword
Address area of a breakpoint
Set either of the following keywords:
physical: physical address
virtual: virtual address
<asid>
Numerical value
ASID value of a breakpoint when virtual is set to
the <space> parameter.
Notes: 1. When no parameters are set, all software breakpoints are cleared.
2. When <address_space> and <asidopt> are not set, all software breakpoints that match
the specified address are cleared.
Note: The parameters for this command differ according to the product. For the
specifications of each product, refer to the online help.
Rev. 2.0, 01/01, page 160 of 214