M37733EHL Datasheet, PDF (13/35 Pages) Mitsubishi Electric Semiconductor – PROM VERSION OF M37733MHLXXXHP(MICROCOMPUTERS)

PRELIMINARY _{NSootimcee: pTahriasmisentroict} ^{alimfinitsalasrpeescuifbicjeactitotno. change.}
MITSUBISHI MICROCOMPUTERS
M37733EHLXXXHP
PROM VERSION OF M37733MHLXXXHP
SAFETY INSTRUCTIONS
(1) A high voltage is used for programming. Take care that over-
voltage is not applied. Take care especially at power on.
(2) The programmable M37733EHLHP that is shipped in blank is also
provided. For the M37733EHLHP, Mitsubishi Electric corp. does
not perform PROM programming test and screening following the
assembly processes. To improve reliability after programming,
performing programming and test according to the flow below
before use is recommended.
Programming with PROM programmer
ADDRESSING MODES
The M37733EHLXXXHP has 28 powerful addressing modes. Refer
to the “7700 Family Software Manual” for the details.
MACHINE INSTRUCTION LIST
The M37733EHLXXXHP has 103 machine instructions. Refer to the
“7700 Family Software Manual” for the details.
DATA REQUIRED FOR PROM ORDERING
Please send the following data for writing to PROM.
(1) M37733EHLXXXHP writing to PROM order confirmation form
(2) 80P6D, 80P6Q mark specification form
(3) ROM data (EPROM 3 sets)
Screening
(Caution)
(Leave at 150 °C for 40 hours)
Verify test with PROM programmer
Function check in target device
Caution : Never expose to 150 °C exceeding 100 hours.
13