RA01L9595M_10 Datasheet, PDF (11/13 Pages) Mitsubishi Electric Semiconductor – 952-954MHz 1.4W 3.3V, 2 Stage Amp. For RFID READER / WRITER

ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
P.C.B Land Pattern Recommendation
8.60
8.00
4.60
2.55
③
②
Silicon RF Power Semiconductors
RoHS COMPLIANT ^RA01L9595M
0.5
④
①
EQUILATERAL TRIANGLE ARRANGEMENT
THROUGH HOLE
Mounting method
Mitsubishi recommends device mounting like Fig.1. In order to heat radiation, we recommend to fix
the PCB and heat sink by screw. This PCB has through holes that filled up with resin to restrain the
solder flow under the RF Ground. The interval of through holes is 0.4mm and these holes are
arranged in the shape of equilateral triangles.
Fig.1
Gate
Drain
RF Ground
RF Input
Reflow soldering
RF Output
Fix with screws.
Printed Circuit board
heat sink
# Note: Mitsubishi Heat Sink size=30 * 60 * 10 Unit: mm
RA01L9595M
11/13
22 Jun 2010