RA03M4043MD Datasheet, PDF (1/7 Pages) Mitsubishi Electric Semiconductor – RF MOSFET MODULE 400-430MHz 38dBm 7.2V, 2 Stage Amp. For PORTABLE RADIO

ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
MITSUBISHI RF MOSFET MODULE
RA03M4043MD
RoHS Compliance , 400-430MHz 38dBm 7.2V, 2 Stage Amp. For PORTABLE RADIO
DESCRIPTION
The RA03M4043MD is a 38 dBm output RF MOSFET
Amplifier Module for 7.2 volt portable radios that operate in the
400 to 430 MHz range.
BLOCK DIAGRAM
2
34
FEATURES
• Enhancement-Mode MOSFET Transistors
(I_DD≅0 @ V_DD=7.2V, V_GG=0V)
• P_out>38dBm @ V_DD=7.2V, P_in=19dBm
Idq1=20mA(Vgg1adjust.),Idq2=1A(Vgg2 adjust.)
• η_T>35%
@ V_DD=7.2V, P_out=38dBm (Pin adjust.),
Idq1=20mA(Vgg1 adjust.),Idq2=1A(Vgg2 adjust.)
• IMD3<-25dBc @ V_DD=7.2V, P_out (average) =35dBm (Pin
adjust)
Two tone test at 1KHz separation
Idq1=20mA(Vgg1 adjust.),Idq2=1A(Vgg2 adjust.)
• Broadband Frequency Range: 400-430MHz
• Low-Power Adjust. Current I_GG=1mA (typ) at V_GG=3.5V
• Module Size: 30 x 10 x 5.4 mm
1
5
6
1 RF Input (P_in)
2 FIRST STAGE GATE BIAS DC SUPPLY TERMINALÊ¢Vgg1Ê£
3 FINAL STAGE GATE BIAS DC SUPPLY TERMINALÊ¢Vgg2Ê£
4 Drain Voltage (V_DD), Battery
5 RF Output (P_out)
6 RF Ground (Case)
PACKAGE CODE: H46S
RoHS COMPLIANT
• RA03M4043MD-101 is a RoHS compliant products.
• RoHS compliance is indicate by the letter “G” after the Lot Marking.
• This product include the lead in the Glass of electronic parts and the
lead in electronic Ceramic parts.
How ever
,it applicable to the following exceptions of RoHS Directions.
1.Lead in the Glass of a cathode-ray tube, electronic parts, and
fluorescent tubes.
2.Lead in electronic Ceramic parts.
ORDERING INFORMATION:
ORDER NUMBER
RA03M4043MD-101
SUPPLY FORM
Antistatic tray,
25 modules/tray
RA03M4043MD
MITSUBISHI ELECTRIC
1/8
31 Jan 2007