MF38M1-L6DAGXX Datasheet, PDF (1/11 Pages) Mitsubishi Electric Semiconductor – 8/16-bit Data Bus Static RAM Card

8/16-bit Data Bus
Static RAM Card
MITSUBISHI MEMORY CARD
STATIC RAM CARDS
MF38M1-L6DAGXX
Connector Type
Two- piece 68-pin
DESCRIPTION
Mitsubishi’s Static RAM cards provide large
memory capacities on a device approximately
the size of a credit card
(85.6mm×54mm×5.0mm).
The cards use an 8/16 bit data bus.
Availabale in 8MB capacities, Mitsubishi’s
SRAM cards conform to the JEIDA/PCMCIA
standard.
Mitsubishi acheived high density memory,
while maintaining credit size by using a thin
small outline packaging technology(TSOP).
The TSOP surpasses conventional memory
card chip-on-board packaging technology where
larger, surface-mount devices result in a
tradeoff between card size and optimum memory
density. This allows up to 16 memory Ics
(plus interface circuitry) to be mounted in a
card that in only 5.0mm thick.
FEATURES
nUses TSOP (Thin Small Outline Package) to
achieve very high memory density coupled
with high reliability, without enlarging card
size.
nOne to 16 memory ICs can be mounted in a
card that is only 5.0mm thick.
nElectrostatic discharge protection to 15kV
nBuffered interface
nWrite protect switch
nAttribute memory
n68pin JEIDA/PCMCIA
APPLICATIONS
nOffice automation
nData Communication
nComputers
nIndustrial
nTelecommunications
nConsumer
PRODUCT LIST
Item
Type name
MF38M1-L6DAGXX
Memory
capacity
8MB
Data Bus
width(bits)
8/16
Attribute
memory
YES
Auxialiary
battery
NO
Memory
organization
4M bit SRAM×16
Outline
drawing
68P-010
Main battery
holder
Screw type
MITSUBISHI
ELECTRIC
1/11