MF-622DF-T12-43X Datasheet, PDF (1/10 Pages) Mitsubishi Electric Semiconductor – SONET/SDH TRANSMITTER & RECEIVER

MITSUBISHI (OPTICAL DEVICES)
MF-622DF-T12-43x/45x/46x
MF-622DS-R13-24x
DESCRIPTION
Transmitter uses uncooled laser in a hermetic pigtail
coaxial module with drivered by specific integrated
circuit.
Receiver uses PIN preamp in a hermetic pigtail
coaxial module and integrated circuits for reshaping,
retiming and regenerating optical signal.
SONET/SDH TRANSMITTER & RECEIVER
FEATURES
SONET,SDH system from intra-office to long-
leach application fully line up
Low cost and Low power consumption
Multisourced 20-Pin DIP with pigtail fiber
Single +5V power supply and P-ECL compatible
input and output
Operating case temperature range -40 to 85°C.
With clock recovery and digital alarm function
APPLICATION
Short haul and long haul telecommunication systems
for SDH STM-4 / SONET OC-12.
ABSOLUTE MAXIMUM RATINGS
Stress below listed absolute maximum rating may cause permanent damage to the module.
This is a stress only and functional operation of the module at these or any other conditions in excess of those
given in the operational sections of this data sheet.
Exposure to Absolute Maximum Rating for extended periods may affect module reliability.
Ta=25°C
Parameters
Symbol
Ratings
Unit
Supply voltage
Vcc
+6 to 0
V
PECL high output current
PECL input voltage
-
-50 to 0
mA
-
0 to Vcc+0.4
V
Storage temperature
Operating case temperature
Soldering Temperature
Soldering Time
Tstg
-40 to 85
°^C
Tc
-40 to 85
°^C
-
+260
°^C
-
10
sec
Relative humidity(non condensation)
Fiber bend radius from package
-
10 to 80
%
rF
32
mm