M63832GP Datasheet, PDF (1/4 Pages) Mitsubishi Electric Semiconductor – 7-UNIT 500mA DARLINGTON TRANSISTOR-ARRAY

PRELIMINARY _{NSootmicee:pTahriasmisetnroict laimfiintsalasrepescuibficjeacttiotno.change.}
MITSUBISHI SEMICONDUCTOR <TRANSISTOR ARRAY>
M63832GP/KP
7-UNIT 500mA DARLINGTON TRANSISTOR-ARRAY
DESCRIPTION
The M63832GP/KP 7-channel sinkdriver, consists of 7 PNP
and 14 NPN transistors connected to from seven high current
gain driver pairs.
FEATURES
G _{High breakdown voltage (BVCEO ≥ 50V)}
G _{High-current driving (IC(max) = 500mA)}
G _{3V micro computer compatible input}
G _{“L” active level input}
G _{With input diode}
G _{Wide operating temperature range (Ta = –40 to +85°C)}
APPLICATION
Output for 3 voltage microcomputer series and interface with
high voltage system. Relay and small printer driver, LED, or
incandescent display digit driver.
PIN CONFIGURATION
INPUT
IN1 1
IN2 2
IN3 3
IN4 4
IN5 5
IN6 6
IN7 7
GND 8
16 O1
15 O2
14 O3
13 O4 OUTPUT
12 O5
11 O6
10 O7
9 VCC
16P2S-A(GP)
Package type 16P2Z-A(KP)
CIRCUIT DIAGRAM
FUNCTION
The M63832GP/KP is transistor-array of high active level
seven units type which can do direct drive of 3 voltage micro-
computer series. A resistor of 3.5kΩ is connected between
the input and the base of PNP transistors. The input diode is
intended to prevent the flow of current from the input to the
Vcc. Without this diode, the current flows from “H” input to
the Vcc and the “L” input circuit is activated, in such a case
where one of the inputs of the 7 circuit is “H” and the other
are “L” to save power consumption. The diode is inserted to
prevent such mis-operation. The outputs are capable of driv-
ing 500mA and are rated for operation with output voltage up
to 50V.
INPUT
20K
3.5K
1.05K
7.2K 3K
VCC
OUTPUT
GND
The seven circuits share the Vcc and GND
The diode, indicated with the dotted line, is parasitic, and
cannot be used.
Unit : Ω
ABSOLUTE MAXIMUM RATINGS (Unless otherwise noted, Ta = –40 ~ +85°C)
Symbol
VCC
VCEO
IC
VI
Pd
Topr
Tstg
Parameter
Supply voltage
Collector-emitter voltage
Collector current
Input voltage
Power dissipation
Operating temperature
Storage temperature
Conditions
Output, H
Current per circuit output, L
Ta = 25°C, when mounted on board
Ratings
Unit
7
V
–0.5 ~ +50
V
500
mA
–0.5 ~ VCC
V
0.80(FP)/0.78(KP)
W
–40 ~ +85
°C
–55 ~ +125
°C
Sep. 2001