M63800FP Datasheet, PDF (1/4 Pages) Mitsubishi Electric Semiconductor – 7-UNIT 500mA SOURCE TYPE DARLINGTON TRANSISTOR ARRAY WITH CLAMP DIODE

MITSUBISHI SEMICONDUCTOR <TRANSISTOR ARRAY>
M63800FP
7-UNIT 500mA SOURCE TYPE DARLINGTON TRANSISTOR ARRAY WITH CLAMP DIODE
DESCRIPTION
M63800FP is a seven-circuit output-sourcing Darlington
transistor array. The circuits are made of PNP and NPN tran-
sistors. This semiconductor integrated circuit performs high-
current driving with extremely low input-current supply.
FEATURES
High breakdown voltage (BVCEO ≥ 50V)
High-current driving (Io(max) = –500mA)
With output clamping diodes
Driving available with CMOS IC output of 6-16V or with TTL output
Wide operating temperature range (Ta = –20 to +75°C)
Output current-sourcing type
PIN CONFIGURATION


IN1→
1


IN2→
2


IN3→
3

INPUT 

IN4→
4


IN5→
5


IN6→
6

 IN7→ 7
VS 8
16
→O1


15
→O2


14
→O3



13
→O4
 OUTPUT

12
→O5


11
→O6



10 →O7 
9 GND
Package type 16P2N-A
APPLICATION
Drives of relays, printers, LEDs, fluorescent display tubes
and lamps, and interfaces between MOS-bipolar logic sys-
tems and relays, solenoids, or small motors
FUNCTION
The M63800FP has seven circuits, which are made of input
inverters and current-sourcing outputs. The outputs are
made of PNP transistors and NPN Darlington transistors.
The PNP transistor base current is constant. A spike-killer
clamping diode is provided between each output pin and
GND. VS (pin 8) and GND (pin 9) are used commonly among
the eight circuits.
The input has resistance of 3kΩ, and a maximum of 10V can
be applied. The output current is 500mA maximum. Supply
voltage VS is 50V maximum.
The M63800FP is enclosed in a molded small flat package,
enabling space-saving design.
CIRCUIT DIAGRAM
VS
20K
3K
INPUT
7.2K
1.5K
3K
OUTPUT
GND
The seven circuits share the VS and GND.
The diode, indicated with the dotted line, is parasitic, and cannot
be used.
Unit : Ω
ABSOLUTE MAXIMUM RATINGS (Unless otherwise noted, Ta = –20 ~ +75°C)
Symbol
VCEO ^#
VS
Parameter
Collector-emitter voltage
Supply voltage
VI
Input voltage
IO
Output current
IF
Clamping diode forward current
VR ^# Clamping diode reverse voltage
Pd
Power dissipation
Topr
Operating temperature
Tstg
Storage temperature
# : Unused I/O pins must be connected to GND.
Output, L
Conditions
Current per circuit output, H
Ta = 25°C, when mounted on board
Ratings
Unit
–0.5 ~ +50
V
50
V
–0.5 ~ +10
V
–500
mA
–500
mA
50
V
1.00
W
–20 ~ +75
°C
–55 ~ +125
°C
Aug. 1999