M61323SP Datasheet, PDF (1/15 Pages) Mitsubishi Electric Semiconductor – WIDE FREQUENCY BAND ANALOG SWITCH

MITSUBISHI ICs <Monitor>
M61323SP/FP
WIDE FREQUENCY BAND ANALOG SWITCH
DESCRIPTION
The M61323SP/FP is a semiconductor integrated circuit for
the RGBHV interface. The device features switching signals
input from two types of image sources and outputting the
signals to the CRT display,etc. Synchronous signals,
meeting a frequency band of 10KHz to 200KHz, are output
at TTL. The frequency band of video signals is 250MHz,
acquiring high-resolution images, and are optimum as an
interface IC with high-resolution CRT display and various
new media.
The M61323SP/FP keeps the power saving mode, and
it can reduce ICC about 10mA under the condition that
all Vcc are supplied.
FEATURES
Frequency band : RGB........................................250MHz
: H,V...........................10KHz to 200KHz
Input level:RGB............................................0.7Vp-p(Typ.)
H,V TTL input ....................3 to 5Vo-p (bipolar)
Only the G channel is provided with Sync-on video output.
The TTL format is adopted for HV output.
APPLICATION
Display monitor
RECOMMENDED OPERATING CONDITION
Supply voltage range...................................4.75 to 5.25V
Rated voltage range..................................................5.0V
PIN CONFIGURATION(TOP VIEW)
Vcc1 (R) 1
Input1 (R) 2
Vcc1 (G) 3
Input1 (G) 4
Vcc1 (B) 5
Input1 (B) 6
Input1 (H) 7
Input1 (V) 8
GND1 9
Input2 (R) 10
PowerSave SW 11
Input2(G) 12
Input SW 13
Input2 (B) ₁₄
Input2 (H) 15
Input2 (V) ₁₆
32 VCC2 (R)
31 OUTPUT (R)
30 GND2(R)
29 Vcc2(G)
28 OUTPUT(G)
27 GND2 (G)
26 Vcc2 (B)
25 OUTPUT(B)
24 GND2(B)
23 G Buffer out
22 Sync SEP in
21 Sync SEP out
20 Vcc3
19 OUTPUT(H)
18 OUTPUT(V)
17 GND3
OUTLINE:32P4B
PIN CONFIGURATION(TOP VIEW)
Vcc1 (R) 1
Input1 (R) 2
Vcc1 (G) 3
Input1 (G) 4
Vcc1 (B) 5
Input1 (B) 6
Input1 (H) 7
Input1 (V) 8
GND1 9
GND1 10
Input2 (R) 11
PowerSave SW 12
Input2(G) 13
Input SW 14
Input2 (B) 15
Input2 (H) ¹⁶
Input2 (V) ¹⁷
NC ¹⁸
36 NC
35 VCC2 (R)
34 OUTPUT (R)
33 GND2(R)
32 Vcc2(G)
31 OUTPUT(G)
30 GND2 (G)
29 Vcc2 (B)
28 OUTPUT(B)
27 GND2(B)
26 G Buffer out
25 Sync SEP in
24 Sync SEP out
23 Vcc3
22 Vcc3
21 OUTPUT(H)
20 OUTPUT(V)
19 GND3
OUTLINE:36P2R
MITSUBISHI
1 15