M61303FP Datasheet, PDF (1/22 Pages) Mitsubishi Electric Semiconductor – IIC BUS controled 3channel video pre-amplifier for LCD display monitor

MITSUBISHI<LINEAR IC>
M61303FP
IIC BUS controled 3channel video pre-amplifier for LCD display monitor.
DESCRIPTION
M61303FP is integrated Circuit f or LCD Display
Monitor.It is controlled IIC BUS and Band Wide is
180MHz.
It includes OSD Blanking ,OSD Mixing,Wide Band
Amplif ier,Main/Sub Contrast Main/Sub Brightness
,and 2 Input routes.
Vcc Voltage is 5V and Flat package is used.
then it is the suitable to LCD monitor.
PIN CONFIGURATION
R VCC2 ¹
R OUTPUT 2
FEATURES
1.Frequency : RGB 180MHz(at -3dB)
Band Width _{OSD 80MHz}
2.Input
: RGB Input dy namic range:Max1VP-Ppositiv e
2 input routes is changed by IIC BUS
RGB OSD 3.5VP-P 5.0VP-P(positiv e)
OSD BLK 3.5VP-P 5.0VP-P(positiv e)
R GND2 ³
G VCC2 4
G OUTPUT ⁵
G GND2 6
GND ⁷
B VCC2 8
B OUTPUT ⁹
3.Output
: RGB 2.2VP-P (Max)
OSD 2.0VP-P (Max)
Output dy namic range 0.5
It can driv e 14pF
2.2V
4.Contrast
: Both of sub and main contrast
are controlled by IIC Bus(8bit).
Control Range :-15dB +15dB.
5.Brightness : Both of sub and main contrast
are controlled by IIC Bus(8bit).
Control Range :0.5V 2.2V.
B GND2 10
GND ¹¹
GND 12
Analog Gnd 13
Analog Vcc 14
GND 15
Clamp Pulse IN 16
GND 17
Digital GND 18
6.OSD Adjust :2 Control Ranges (Max1VP-P or Max2VP-P )
are able to be changed by IIC Bus.
SDA 19
SCL 20
Digital VCC ²¹
42 R INPUT1
41 R VCC1
40 R INPUT2
39 R GND 1
38 GND
37 G INPUT1
36 G VCC1
35 G INPUT2
34 G GND 1
33 GND
32 B INPUT1
31 B VCC1
30 B INPUT2
29 B GND 1
28 GND
27 _{OSD BLK IN}
26 R OSD IN
25 _{G OSD IN}
24 _{B OSD IN}
23 _GND
22 GND
Outline:42P9R-B
RECOMMENDED OPERATING CONDITIONS
Supply Voltage Range 4.7V 5.3V
Rated Supply Voltage 5.0V
Consumption of electricity 800mW
MITSUBISHI
1
22