|
M52393P Datasheet, PDF (1/16 Pages) Mitsubishi Electric Semiconductor – EDTV2 IDENTIFICATION SIGNAL DETECTOR | |||
|
MITSUBISHI ICs (AV COMMON)
M52393P/FP
EDTV2 IDENTIFICATION SIGNAL DETECTOR
DESCRIPTION
The M52393 are integrated-circuits of a semiconductor, developed
especially for EDTV2 identiï¬cation signal detection.
In contrast to such ICs, few products on the IC market had the
simple function of detecting identiï¬cation signals. For that purpose,
many manufacturers had to combine discrete components (non-
ICs) with gate arrays. There was a great demand for ICs that
enabled cost reduction.
In order to satisfy demand, we have developed the EDTV2
identiï¬cation signal processing ICs that include all necessary
capabilities for detection (synchronous signal separation, line
counter, ï¬lters, level detection, and bit judgment). The use of such
ICs reduces parts, eliminates the need for complicated adjustment,
and enables easy handling and cost reduction.
FEATURES
⢠All necessary detection capabilities, such as a synchronous sig-
nal separation circuit, are integrated into a single microchip. The
use of the microchip can simplify application circuits, and elimi-
nate the need for adjustment. (Only two inputs are provided:
video signal input and fsc signal input.)
⢠Our original method is used for distinguishing EDTV2 identiï¬ca-
tion signals from normal video signals.
Therefore the accuracy of identiï¬cation is improved.
⢠The detection level is adjustable.
⢠The microchip operates on a single supply voltage of 5V.
⢠Two types of packages are provided:
DIP with a lead pitch of 2.54mm (M52393P); and SOP with a
pitch of 1.27mm (M52393FP).
PIN CONFIGURATION (TOP VIEW)
2.04M TRAP 1
COMP1 2
CLAMP1 3
COMP2 4
CLAMP2 5
COMP3 6
LINE 7
CORRELATION SW
GND 8
16 VCC
15 VIDEO IN
14 3.58M TRAP
13 SYNC SEPA FILTER
12 V.SEPA FILTER
11 fSC IN
10 FRAME/FIELD SW
9 DET OUT
Outline 16P4
16P2N-A
APPLICATION
TV and videocassette recorder compatible with EDTV2.
RECOMMENDED OPERATING CONDITION
Supply voltage range........................................................4.7 to 5.3V
Rated supply voltage.....................................................................5V
BLOCK DIAGRAM
VCC
VIDEO IN
16
15
3.58M TRAP
14
SYNC SEPA
FILTER
13
V.SEPA FILTER
12
fSC IN
11
FRAME/
FIELD SW
10
DET OUT
9
CLAMP
TRAP (3.58MHz)
14dB AMP
Sync
Sepa.
V Sepa
PULSE GEN.
LED
DRIVER
LPF 1
CLAMP 1
COMP 1
Counter
BPF
(2.1M)
TRAP
(2.1M)
DET 3
CLAMP 2
COMP 3
COMP 2
Bit judge
1
2.04M TRAP
2
COMP1
3
CLAMP1
4
COMP2
5
CLAMP2
6
COMP3
7
LINE
CORRELATION SW
8
GND
1
|
▷ |