M52342FP Datasheet, PDF (1/13 Pages) Mitsubishi Electric Semiconductor – PLL-SPLIT VIF/SIF IC

MITSUBISHI ICs (TV)
M52342FP
PLL-SPLIT VIF/SIF IC
DESCRIPTION
The M52342FP is IF signal-processing IC for VCRs and TVs. It
enable the PLL detection system despite size as small as that of
conventional quasi-synchronous VIF/SIF detector, IF/RF AGC, SIF
limiter, FM detector, QIF AGC and EQ AMP.
FEATURES
• Video detection output is 2VP-P. It has built-in EQ AMP.
• The package is a 24-pin flat package, suitable for space saving.
• The video detector uses PLL for full synchronous detection
circuit. It produces excellent characteristics of DG, DP, 920kHz
beat, and cross color.
• Dynamic AGC realizes high speed response with only single
filter.
• Video IF and sound IF signal processings are separated from
each other. VCO output is used to obtain intercarrier. This PLL-
SPLIT method and built-in QIF AGC provide good sound
sensitivity and reduces buzz.
• As AFT output voltage uses the APC output voltage, VCO coil is
not used.
• Audio FM demodulation uses PLL system, so it has wide
frequency range with no external parts and no adjustment.
APPLICATION
TV sets, VCR tuners
RECOMMENDED OPERATING CONDITION
In case of VCC and Vreg. out short
Supply voltage range....................................................4.75 to 5.25V
Recommended supply voltage...................................................5.0V
Incase of Vreg. out open
Supply voltage range......................................................8.5 to 12.5V
PIN CONFIGURATION (TOP VIEW)
RF AGC DELAY 1
AFT OUT 2
RF AGC OUT 3
VIF IN 4
VIF IN 5
GND 6
GND 7
GND 8
QIF DET IN 9
IF AGC FILTER 10
NFB 11
AUDIO OUT 12
24 EQ F/B
23 APC FILTER
22 VIDEO OUT
21 Vreg. OUT
20 Vreg. OUT
19 VCO COIL
18 VCO COIL
17 Vcc
16 Vcc
15 QIF OUT
14 AFT SW/NPSW
13 LIMITER IN
Outline 24P2N-A
BLOCK DIAGRAM
APC FILTER
Vreg. OUT
VCO COIL
EQ F/B
VIDEO OUT
Vreg. OUT
VCO COIL Vcc
24
23
22
21
20
19
18
17
QIF OUT
LIMITER IN
Vcc
AFT SW/NPSW
16
15
14
13
VCO
Vcc REG
Inter
Split
LIM AMP
AFT
EQ
AMP
VIDEO
DET
APC
QIF DET
QIF AGC
QIF AMP
FM DET
VIF AMP
RF AGC
IF AGC
AF AMP
1
2
3
4
RF AGC DELAY
RF AGC OUT
AFT OUT
VIF IN
5
VIF IN
6
GND
7
GND
8
GND
9
10
11
IF AGC FILTER
QIF DET IN
NFB
12
AUDIO OUT
1