M37753FFCFP Datasheet, PDF (1/67 Pages) Mitsubishi Electric Semiconductor – SINGLE CHIP 16 BIT CMOS MICROCOMPUTER FLASH MEMORY VERSION

PRELIMINARY _{NSootimcee: pTahriasmisentroict} ^{alimfinitsalasrpeescuifbicjeactitotno. change.}
MITSUBISHI MICROCOMPUTERS
M37753FFCFP
M37753FFCHP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER FLASH MEMORY VERSION
DESCRIPTION
The M37753FFCFP and the M37753FFCHP are single-chip micro-
computers designed with high-performance CMOS silicon gate tech-
nology, including the internal flash memory. These are housed in
80-pin plastic molded QFP.
These microcomputers have a CPU and a bus interface unit. The
CPU is a 16-bit parallel processor that can also be switched to per-
form 8-bit parallel processing, and the bus interface unit enhances
the memory access efficiency to execute instructions fast.
In addition to the 7700 Family basic instructions, the M37753FFCFP
and the M37753FFCHP have 6 special instructions which contain in-
structions for signed multiplication/division; these added instructions
improve the servo arithmetic performance to control hard disk drives
and so on.
These microcomputers also include the flash memory, RAM, mul-
tiple-function timers, motor control function, serial I/O, A-D converter,
D-A converter, and so on.
The internal flash memory can be programed and erased by using a
PROM programmer or by control of the central processing unit
(CPU). Therefore, these microcomputers can change the program
easily even after they are mounted on the board.
APPLICATION
Control devices for personal computer peripheral equipment such as
CD-ROM drives, hard disk drives, high density FDD, printers
Control devices for office equipment such as copiers and facsimiles
Control devices for industrial equipment such as communication and
measuring instruments
Control devices for equipment required for motor control such as in-
verter air conditioner and general purpose inverter
DISTINCTIVE FEATURES
<Microcomputer mode>
• ^{Number of basic machine instructions .................................... 109}
(103 basic instructions of 7700 Family + 6 special instructions)
• ^{Memory size}
Flash memory ................................ 120 Kbytes
RAM ................................................ 3968 bytes
• ^{Instruction execution time}
The fastest instruction at 40 MHz frequency ...................... 100 ns
• ^{Single power supply ....................................................... 5V ±10 %}
• ^{Low power dissipation (at 40 MHz frequency) ....... 125 mW (Typ.)}
• ^{Interrupts ........................................................... 21 types, 7 levels}
• ^{Multiple-function 16-bit timer ................................................... 5+3}
(three-phase motor drive waveform or pulse motor control wave-
form output)
• ^{Serial I/O (UART or clock synchronous) ..................................... 2}
• ^{10-bit A-D converter ............................................ 8-channel inputs}
• ^{8-bit D-A converter ............................................ 2-channel outputs}
• ^{12-bit watchdog timer}
• ^{Programmable input/output (ports P0—P8) .............................. 68}
• ^{Small package [M37753FFCHP]}
................................... 80-pin fine pitch QFP (lead pitch : 0.5 mm)
<Flash memory mode>
• ^{Supply voltage ................................................... VCC = 5 V ± 10 %}
• ^{Program/Erase voltage ...................................... VPP = 12 V ± 5 %}
• ^{Programming method ........................ Programming in unit of byte}
• ^{Erasing method .............................................................................}
Batch erasing and 2-division-block erasing (in CPU reprogramming mode)
• ^{Program/Erase control by software command}
• ^{Number of times for programming/erasing .............................. 100}