FU-653SEA-X1M6F Datasheet, PDF (1/4 Pages) Mitsubishi Electric Semiconductor – 1.55 μm EAM/DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL

Some parametric limits are subject to change
JAN06 (1/4)
MITSUBISHI (OPTICAL DEVICES)
FU-653SEA-x1M6F
1.55 μm EAM/DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL
DESCRIPTION
Module type FU-653SEA-x1M6F is a 1.55μm EA
modulator integrated DFB-LD module with single-
mode optical fiber.
This module is suitable to a light source for use in
10Gb/s digital optical communication systems.
FEATURES
• 1600ps/nm dispersion tolerance
• High optical out put power (+2dBm)
• Input impedance is 50Ω
• Electroabsorption Modulator integrated Multi quantum
wells (MQW) DFB Laser Diode
• Emission wavelength is 1.55nm band
• Single mode optical fiber pig-tail
• Built-in optical isolator
• Built-in thermal electric cooler
• 7-pin Butterfly package with GPO connectoｒ
• With photodiode for optical output monitor
• RoHS (2002/95/EC) complianｔ
APPLICATION
STM-64, OC192 (10Gb/s)
ABSOLUTE MAXIMUM RATINGS (Tld=Tset)
Parameter
Symbol
Conditions
Rating
Unit
Laser diode
Optical output power
Pf
CW
6
mW
Forward current
If
CW
150
mA
Reverse voltage
Vrl
CW
2
V
Modulator
Reverse voltage
Vrm
-
5
V
Forward voltage
Vfm
-
1
V
Photodiode for
Reverse voltage
Vrd
-
monitoring
Forward current
Ifd
-
20
V
2
mA
Thermoelectric
cooler(Note 1)
Current
Voltage
Ipe
-
Vpe
-
1.5
A
3
V
Operating case temperature
Tc
-
-20 to 70
°C
Storage temperature
Tstg
-
-40 to 85
°C
Note 1. Even if the thermoelectric cooler(TEC) is operated within the rated conditions, uncontrolled current loading or
operation without heat sink may easily damage the module by exceeding the storage temperature range.
Thermistor resistance should be properly monitored by the feedback circuit during TEC operation to avoid the
catastrophic damage.
Mitsubishi Electric Corporation reserves the right to make changes to the products or information contained herein
without notice. No liability is assumed as a result of their use or application.
MITSUBISHI CONFIDENTIAL