|
MT91610 Datasheet, PDF (1/18 Pages) Mitel Networks Corporation – Analog Ringing SLIC | |||
|
Features
⢠Transformerless 2W to 4W conversion
⢠Controls battery feed to line
⢠Programmable line impedance
⢠Programmable network balance impedance
⢠Off-hook and dial pulse detection
⢠Protects against GND short circuit
⢠Programmable gain
⢠Programmable constant current mode with
constant voltage fold over
⢠Transformerless balanced ringing with
automatic ring trip circuit. No mechanical relay
⢠Supports low voltage ringing
⢠Line polarity reversal
⢠On-hook transmission
⢠Power down and wake up capability
⢠Meter pulse injection
⢠Ground Key detection
Applications
Line interface for:
⢠PABX
⢠Intercoms
⢠Key Telephone Systems
⢠Control Systems
DS5181
MT91610
Analog Ringing SLIC
Preliminary Information
ISSUE 2
February 2000
Package Information
MT91610AQ 36 Pin QSOP Package
-40°C to +85°C
Description
The Mitel MT91610, with an external bipolar driver
(Figure 4), provides an interface between a switching
system and a subscriber loop. The functions
provided by the MT91610 include battery feed,
programmable constant current with constant voltage
fold over for long loop, 2W to 4W conversion, off-
hook and dial pulse detection, direct balance ringing
with built in ring tripping, unbalance detection, user
deï¬nable line and network balance impedanceâs and
gain, and power down and wake up. The device is
fabricated as a CMOS circuit in a 36 pin QSOP
package.
RV PD
TD
Tip/Ring Drive
RD
Controller
TIP
RING
RF1, RF2
RC
CP4
CP6
CP7
Line Sense
Over-Current
Protection Circuit
Ring Drive
Controller
GTX1 ESE ESI GTX0 VX
Audio Gain & Network
Balance Circuit
VR
Z3
2 W to 4 W
Conversion & Line
Z2
Impedance
Loop Supervision
CP5
Line
LR
Reverse
Driver
Figure 1 - Functional Block Diagram
1
|
▷ |