MSDW1000_11 Datasheet, PDF (3/4 Pages) Minmax Technology Co., Ltd. – DC/DC CONVERTER 2W, Small Footprit: 24.0 x 18.1 mm (0.94 x 0.71 inches)

Power Derating Curve
100
Natural
80
convection
100LFM
60
200LFM
400LFM
40
MSDW1000 SERIES
DC/DC CONVERTER 2W, SMD-Package
20
0
~
-40
0
20
40
60
80
Ambient Temperature ]
100 110
Notes
1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
2 Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%
3 Ripple & Noise measurement bandwidth is 0-20MHz.
4 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules;
however they may not meet all specifications listed.
5 All DC/DC converters should be externally fused at the front end for protection.
6 Other input and output voltage may be available, please contact factory.
7 Specifications subject to change without notice.
8 It is not recommended to use water-washing process on SMT units.
Package Specifications
Mechanical Dimensions
24.0 [0.94]
3.11
15.24 [0.6]
2.54
[0.12]
[0.1]
16
10 9
Connecting Pin Patterns
17.78mm
1.4mm(Min)
2.8mm
19.3mm
13.7mm
1
78
1.00 [0.04]
15.24mm
2.54mm
S SEATING
PLANE
0.15 S
►All dimensions in mm (inches)
►Tolerance: X.X±0.25 (X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
►Pins ±0.05 (±0.002)
Pin Connections
Pin
1
7
8
9
10
16
Single Output
-Vin
NC
NC
+Vout
-Vout
+Vin
NC : No Connection
Dual Output
-Vin
NC
Common
+Vout
-Vout
+Vin
E-mail:[e-mail] Tel:[phone]
2011/08/11 REV:5 Page 3 of 4
Physical Characteristics
Case Size
: 24.0x13.7x8.0mm (0.94x0.54x0.31 Inches)
Case Material
: Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
Weight
: 5.1g