MSDEU02-HI Datasheet, PDF (3/4 Pages) Minmax Technology Co., Ltd. – qualified for igbt and high isolation applications

MSDEU02-HI SERIES
DC/DC CONVERTER 2W, Ultra-high I/O lsolation, SMD Package
Notes
1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
2 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules;
however they may not meet all specifications listed.
3 We recommend to protect the converter by a slow blow fuse in the input supply line.
4 Other input and output voltage may be available, please contact factory.
5 That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
6 It is not recommended to use water-washing process on SMT units.
7 Specifications are subject to change without notice.
Package Specifications
Mechanical Dimensions
24.0 [0.94]
3.11
15.24 [0.6]
2.54
[0.12]
[0.1]
16
10 9
Connecting Pin Patterns
17.78 [0.70]
1
78
1.00 [0.04]
1.6 [0.06]
2.54 [0.10]
Pin Connections
Pin
1
7
8
9
10
16
Single Output
-Vin
NC
NC
+Vout
-Vout
+Vin
Dual Output
-Vin
NC
Common
+Vout
-Vout
+Vin
NC: No Connection
S SEATING
PLANE
0.15 S
►All dimensions in mm (inches)
►Tolerance: X.X±0.5 (X.XX±0.02)
X.XX±0.25 ( X.XXX±0.01)
►Pins ±0.05 (±0.002)
Physical Characteristics
Case Size
: 24.0x13.7x9.0mm (0.94x0.54x0.35 inches)
Case Material
: Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
Pin Material
: Phosphor bronze
Weight
: 3.75g
E-mail:[e-mail] Tel:[phone]
2015/05/22 REV:1 Page 3 of 4