MA01-HI Datasheet, PDF (3/4 Pages) Minmax Technology Co., Ltd. – Industry Standard Pinout

MA01-HI SERIES
DC/DC CONVERTER 1W, High Isolation,SIP-Package
Notes
1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
2 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules;
however they may not meet all specifications listed.
3 We recommend to protect the converter by a slow blow fuse in the input supply line.
4 Other input and output voltage may be available, please contact factory.
5 That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
6 Specifications are subject to change without notice.
Package Specifications
Mechanical Dimensions
19.5 [0.77]
0.5
[0.02]
2.54 7.62
[0.10] [0.30]
2X2.54
2X[0.10]
Pin Connections
Pin
Single Output
1
+Vin
2
-Vin
5
-Vout
6
No Pin
7
+Vout
Dual Output
+Vin
-Vin
-Vout
Common
+Vout
18.5 [0.73]
Bottom View
12
567
0.50 [0.02]
►All dimensions in mm (inches)
►Tolerance: X.X±0.5 (X.XX±0.02)
X.XX±0.25 ( X.XXX±0.01)
►Pins ±0.05(±0.002)
Physical Characteristics
Case Size
: 19.5x7.1x10.2mm (0.77x0.28x0.40 inches)
Case Material
: Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
Pin Material
: Alloy 42
Weight
: 2.4g
E-mail:[e-mail] Tel:[phone]
2014/04/18 REV:3 Page 3 of 4