APM-40_16 Datasheet, PDF (3/5 Pages) Minmax Technology Co., Ltd. – AC/DC Power Module 40W, Industrial & Medical Safety

APM-40 SERIES
AC/DC Power Module 40W, Industrial & Medical Safety
Notes
1 This product is not designed for use in critical life support systems, equipment used in hazardous environment, nuclear control systems or other
such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet.
2 Specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage, after warm-up time rated output current unless otherwise noted.
3 Ripple & Noise measured with a 0.1μF/50V MLCC and a 1μF/50V Aluminum electrolytic.
4 Safety approvals cover frequency 47-63 Hz.
5 We recommend to protect the converter by a slow blow fuse in the input supply line.
6 Other input and output voltage may be available, please contact factory.
7 That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
8 Specifications are subject to change without notice.
Package Specifications PCB Mounting
Mechanical Dimensions
15.24
[0.60]
12.7
12.7
[0.50] [0.50]
15.24
[0.60]
7
6
5
4
3
15.9 [0.63]
31.6 [1.24]
6.0
[0.24]
30.0
[1.18]
0.7
[0.03]
Pin Connections
Pin Single Output
1
AC (N)
2
AC (L)
3
+Vout
4
No Pin
5
-Vout
6
No Pin
7
NC
Dual Output
AC (N)
AC (L)
+Vout
No Pin
Common
No Pin
-Vout
Mounting M4.0 Thread
NC: No Connection
2
Bottom View
1
55.88 [2.20]
63.5 [2.50]
Physical Characteristics
Case Size
: 88.9x63.5x30.0mm (3.50x2.50x1.18 inches)
Case Material
: Plastic resin (flammability to UL 94V-0 rated)
Pin Material
: Copper Alloy with Gold Plate Over Nickel Subplate
Weight
: 310g
►All dimensions in mm (inches)
►Tolerance: ±0.5 (±0.02)
►Pin diameter  1.0 ±0.1 (0.04±0.004)
E-mail:[e-mail] Tel:[phone]
2016/08/30 REV:3 Page 3 of 5