AKF-15_12 Datasheet, PDF (3/5 Pages) Minmax Technology Co., Ltd. – AC/DC Power Module 15W Fully encapsulated Plastic Case

AKF-15 SERIES
AC/DC POWER MODULE 15W
Notes
1 All Specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted.
2 Ripple & Noise measurement bandwidth is 0~20 MHz
3 These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage the power
supplies however they may not meet all listed specifications.
4 Other input and output voltage may be available, please contact factory.
5 To order the module with chassis mount package, please add a suffix C (e.g. AKF-15S05C).
6 To order the module with UL508 safety, please add a suffix ICE (e.g. AKF-15S05ICE).
7 Part number for DIN-Rail mounting bracket: AC-DIN-01
8 Specifications are subject to change without notice
Package Specifications PCB Mounting
Mechanical Dimensions
8.89 11.43
[0.35] [0.45]
11.43 8.89
[0.45] [0.35]
7
6
5
4
3
Mounting M4.0 Thread
7.1
[0.28]
39.8 [1.57]
Bottom View
7.1
[0.28]
6.0 [0.24]
19.5 [0.77]
0.7 [0.03]
Pin Connections
Pin Single
Dual
(D12,D15)
Dual
(D512)
1
AC(N) – AC Neutral
2
AC(L) – AC Line
3
No Pin
4
-Vout
-Vout
-Vout2
5
No Pin
Common
+Vout2
6
+Vout
+Vout
-Vout1
7
No Pin
+Vout1
Triple
-Vout3
Common
+Vout2
-Vout1
+Vout1
2
1
20.32 [0.80]
54.0 [2.13]
Physical Characteristics
Case Size
: 74.0x54.0x19.5mm (2.91x2.13x0.77 inches)
Case Material
: Plastic resin + Fiberglass (flammability to UL 94V-0 rated)
Pin Material
: Copper Alloy with Gold Plate Over Nickel Subplate
Weight
: 174g
►All dimensions in mm (inches)
►Tolerance: ±0.5 (±0.02)
►Pin diameter  1.0 ±0.1 (0.04±0.004)
E-mail:[e-mail] Tel:[phone]
2012/11/14 REV:19 Page 3 of 5