MSLU100 Datasheet, PDF (1/8 Pages) Minmax Technology Co., Ltd. – 1W, Miniature SMD, Single & Dual Output DC/DC Converters

MSLU100 Series
1W, Miniature SMD, Single & Dual Output DC/DC Converters
Key Features
y Efficiency up to 80%
y 1500VDC Isolation
y MTBF > 2,000,000 Hours
y Low Cost
y Input 5,12 and 24VDC
y Output 3.3, 5, 12,15,9,{5,{12and {15VDC
y Temperature Performance -25] to +75]
y UL 94V-0 Package Material
y Interanl SMD Construction
$
1500
VDC
Low Profile
Low Cost
I/O Isolation
SMD
Minmax's MSLU100 1W DC/DC's are in "gull-wing" SMT package, weigh a mere 1.7 grams and meet IPC/JEDEC J-STD-020C 4th & 5th chapter in
solder-reflow for lead free process.
The series consists of 24 models with input voltages of 5V, 12V and 24VDC which offers standard single output voltages of 3.3V, 5V, 9V,12V, 15V, {5V,
{12V and {15VDC for the choice.
Their impressive guaranteed efficiencies enable all models to deliver their fully rated output power from -25] to +75] without heat sinking or forced-air
cooling.
The MSLU100 series is an excellent selection for a wide variety of applications including data communication equipments, distributed power systems,
telecommunication equipments and industrial robot systems.
The MSLU100 units are available in tape and reel package.
Absolute Maximum Ratings
Parameter
Min. Max. Unit
Input Surge Voltage
( 1000 mS )
5VDC Input Models
12VDC Input Models
24VDC Input Models
-0.7 9 VDC
-0.7 18 VDC
-0.7 30 VDC
Lead Temperature (1.5mm from case for 10 Sec.) --- 260 ]
Internal Power Dissipation
--- 450 mW
Exceeding the absolute maximum ratings of the unit could cause damage.
These are not continuous operating ratings.
Environmental Specifications
Parameter
Conditions Min. Max. Unit
Operating Temperature Ambient -25 +75 ]
Operating Temperature
Case
-25 +90 ]
Storage Temperature
-40 +125 ]
Humidity
--- 95 %
Cooling
Free-Air Convection
Leadfree Reflow Solder Process as per IPC/JEDEC
J-STD-020C peak temp. 245C/10 sec.
1
MINMAX
REV:10 2008/10