ML6209 Datasheet, PDF (1/14 Pages) Minilogic Device Corporation Limited – High Speed LDO Regulators

ML6209
ML6209 Series - High Speed LDO Regulators
(low ESR capacitor compatible, ON/OFF switch)
CMOS Low Power Consumption
Dropout Voltage: 60mV @ 30mA,
200mV @ 100mA
Maximum Output Current:
150mA
Highly Accurate: 1.5V ~ 1.95V ± 3%
2.0V ~ 6.00V ± 2%
Output Voltage Range: 1.5V ~ 6.0V
Low ESR capacitor compatible
◆ General Description
◆ Applications
Mobile phones
Cordless phones
Cameras, video recorders
Portable games
Portable AV equipment
Reference voltage
Battery-powered equipment
◆ Features
The ML6209 series are highly precise, low noise, positive voltage LDO
regulators manufactured using CMOS process. The series achieves high
ripple rejection and low dropout and consists of a standard voltage
source, an error correction, current limiter and a phase compensation
circuit plus a driver transistor. Output voltage is selectable in 50mV
increments within a range of 1.5V ~ 6.0V.
The series is also compatible with low ESR ceramic capacitors which give
added output stability. This stability can be maintained even during load
fluctuations due to the excellent transient response of the series. The CE
function enables the output to be turned off, resulting in greatly reduced
power consumption.
Maximum Output Current: 150mA
Dropout Voltage: 200mV (IOUT = 100mA)
Maximum Operating Voltage: 10V
Output Voltage Range: 1.5V ~ 6.0V in 50mV increments
Highly Accurate: ± 2%
Low Power Consumption: TYP 25µA
Standby Current: less than 0.1µA
High Ripple Rejection: 70dB (10 kHz)
Low Output Noise: 30µVrms
Operational Temperature Range: -40°C ~ +85°C
Low ESR Capacitor Compatible: Ceramic capacitor
◆ Typical Application
P1/14
Rev. A, March 2006