CMA-81 Datasheet, PDF (5/5 Pages) Mini-Circuits – Monolithic Amplifier

Monolithic InGap HBT MMIC Amplifier
CMA-81+
Additional Detailed Technical Information
additional information is available on our dash board. To access this information click here
Performance Data
Case Style
Tape & Reel
Standard quantities available on reel
Data Table
Swept Graphs
S-Parameter (S2P Files) Data Set (.zip file)
DL1721 Ceramic package, exposed paddle, Terminal finish: Ni,Pd,Au
F66-1
7” reels with 20, 50, 100, 200, 500 or 1K, 2K devices.
Suggested Layout for PCB Design
Evaluation Board
Environmental Ratings
PL-366
TB-656-81+
ENV-68
ESD Rating
Human Body Model (HBM): Class 1C (1000 to <2000V) in accordance with ANSI/ESD STM 5.1 - 2001
Machine Model (MM): Class M2 (100 to <200V) in accordance with ANSI/ESD STM5.2-1999
MSL Rating
Moisture Sensitivity: MSL1 (these parts are hermetic, air cavity and therefore, MSL ratings do not strictly
apply. For handling purpose, use MSL1)
Qualification Testing
Test Description
Hermeticity (fine and gross leak)
Acceleration, 30Kg, Y1 Direction
Vibration , 10-2000Hz sine, 20g, 3 axis
Mechanical shock
PIND 20G’s @130 Hz
Temp Cycle -55C/+125C, 1000 Cycles
Autoclave, 121C, RH 100%, 15 Psig, 96 hrs
HTOL, 1000hrs, 105C at rated Voltage condition
Bend Test
Resistance to soldering heat, 3x reflow, 260C peak
Drop Test
Adhesion Strength
Test Method/Process
MIL-STD-202 Method 112, Cond. C & D
MIL-STD-883 Method 2001 Cond. E
MIL-STD-202 Method 204, Cond. D
MIL-STD-202 Method 213, Cond . A
MIL-STD-750 Method 2052.2
MIL-STD-202 Method 107
JESD22-A102C
MIL-STD-202 Method 108, Cond . D
JESD22-B113
JESD22-B102
JESD22-B111
Push Test>10 lb
Results
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Additional Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended
to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s
applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms
Notes
and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits
A.
B.
PEleercfotrrimcaalnscpee_{ccaoinficdnat}qt_aiuoian_nlsi_etya_dnadttt_hrpib_eeurrtefeoisr_{nma.anFndoccer}od_anadt_fiat_uioc_llnos_sntnt_{aaoitnteeemdxpienrentsht}sisl_oys_fspt_tae_htce_eifdicSiant_tiatohn_nis_ddsoapc_reu_dcmif_Tiec_enarttimoarne_sdb_aoac_nsuedmd_teo_hnn_et _Maerien_xiic-nClt_ueirnc_sdu_iveit_e’ds
ta_ro_ipgbp_helic_te_{saxbcaleluneddsetdarebalm}nisdh_eedddoietnesostt
t^fph^oere^mrfr_oe^armu^pn_aand^rtce_eor^fc,^{trhitiesrsiapaencdificmateioansudreomcuemnteinnts.tructions.}
C. The parts covpelreedasbey tvhissistpMecinfici-aCtioinrcduoictsum’ wenetbasreitseubajtecwt wtowM.imni-iCniircuirictsusittasn.dcaormd l/imMitCedLwSatorrarent/ytearnmd tse.rjmsps and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
Page 5 of 5