GVA-91 Datasheet, PDF (4/5 Pages) Mini-Circuits – Monolithic Amplifier

Monolithic InGap HBT MMIC Amplifier
Characterization Test and Application Circuit
GVA-91+
Component
DUT
C1
C2
C3
C4
L1
L2
L3
TB-753+
896-960 MHz
Value
Size
GVA-91+
—
1.0 µF
100 pF
8.2 pF
6.2 pF
0402
2.7 nH
5.6 nH
33 nH
TB-752+
2110-2170 MHz
Value
Size
GVA-91+
—
1.0 µF
22 pF
1.5 pF
1.8 pF
0402
1.2 nH
1.8 nH
18 nH
Fig 1. Block Diagram of Test Circuit used for characterization. (DUT soldered on Mini-Circuits Characterization test board
TB-753+(869-960 MHz) and TB-752+(2110-2170 MHz)
Gain, Return loss, Output power at 1dB compression (P1 dB) , output IP3 (OIP3) and noise figure measured using Agi
lent’s N5242A PNA-X microwave network analyzer.
Conditions:
1. Gain and Return loss: Pin= -25dBm
2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 20 dBm/tone at output.
Product Marking
V91
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
Page 4 of 5