CMA-82 Datasheet, PDF (4/5 Pages) Mini-Circuits – Monolithic Amplifier

Monolithic InGap HBT MMIC Amplifier
Absolute Maximum Ratings
Parameter
Ratings
Operating Temperature (ground lead)
-40°C to 85°C
Storage Temperature
-65°C to 150°C
Operating Current at 5V
160mA
Power Dissipation
0.84W
Input Power
20 dBm
DC Voltage on Pin 3
5.8V
Note:
Permanent damage may occur if any of these limits are exceeded.
Electrical maximum ratings are not intended for continuous normal operation.
CMA-82+
Characterization Test Circuit
Cblock
IN
2
Ibias
RFC
7
Vd _Cblock
1,3,4,5,6,8
Paddle
Vcc
Cbypass
OUT
Fig 1. Block Diagram of Test Circuit used for characterization. (DUT
soldered on Mini-Circuits Test Board TB-829-82+)
Gain, Output power at 1dB compression (P1 dB) and output IP3
(OIP3) are measured using R&S Network Analyzer ZVA-24.
Noise Figure measured using Agilent’s N5242A PNA-X microwave
network analyzer.
Conditions:
1. Gain and Return loss: Pin= -25dBm
Suggested PCB Layout (PL-366)
Product Marking
MCL
CMA-82+
ceramic body
model
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
Page 4 of 5