YSF-2151 Datasheet, PDF (3/5 Pages) Mini-Circuits – Flat Gain Amplifier

™
Flat Gain Amplifier
Electrical Specifications⁽¹⁾ at 25°C, Zo=50Ω unless noted
Parameter
Condition (MHz) Min.
Frequency Range
900
900
18.2
Gain
1600
18.0
2150
18.0
Gain Flatness
900
Input Return Loss
1600
8.0
2150
900
Output Return Loss
1600
16.0
2150
Reverse Isolation
900
Output Power @1 dB compression
1600
2150
18.0
Output Power @3 dB compression
900
Output IP3
1600
30.0
2150
900
Noise Figure
1600
2150
Device Operating Voltage
Device Operating Current
Device Current Variation vs. Temperature⁽²)
Device Current Variation vs Voltage
Thermal Resistance, junction-to-ground lead⁽³⁾
(1) _{Measured on Mini-Circuits Characterization test board TB-589+. See Characterization Test Circuit (Fig. 1)}
(2) _{D(+85°C to -45°C)}
(3) _{Thermal Resistance= Hot spot temperature - Ground lead temperature}

Power Dissipation
Typ.
20.2
20.0
19.8
0.4
10.0
10.0
11.5
14.0
22.0
23.0
30.5
20.0
20.0
20.0
21.0
36.0
35.0
35.0
3.5
3.1
2.6
5
118
2
0.002
56
YSF-2151+
Max.
2150
22.2
22.0
22.0
Units
MHz
dB
± dB
dB
dB
dB
dBm
dBm
dBm
4.1
dB
V
145
mA
µA/°C
mA/mV
°C/W
Absolute Maximum Ratings
Parameter
Ratings
Units
Operating Temperature⁽⁴⁾
Storage Temperature
DC Voltage on Pad 4
Power Dissipation
Input Power
-40 to 85
-65 to 150
7
1.5
21
°C
°C
V
W
dBm
Note: Permanent damage may occur if any of these limits are exceeded.
These ratings are not intended for continuous normal operation.
(4) _{Case is defined as ground paddle.}
DC Current Histogram
USL
DC Current (mA)
USL=Upper Spec Limit
Mini-Circuits^®
ISO 9001 ISO 14001 AS 9100 CERTIFIED
P.O. Box 350166, Brooklyn, New York 11235-0003 [phone] Fax [phone] The Design Engineers Search Engine
For detailed performance specs
& shopping online see web site
® _{Provides ACTUAL Data Instantly at minicircuits.com}
IF/RF MICROWAVE COMPONENTS
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
Page 3