HXG-122 Datasheet, PDF (3/5 Pages) Mini-Circuits – Ultra High IP3 Amplifier Module

Ultra High IP3 Amplifier Module
Electrical Specifications⁽¹⁾ at 25°C and 5V, unless noted
Parameter
Condition (GHz) Min.
Frequency Range
0.5
0.5
—
Gain
0.7
—
0.9
13.9
1.2
—
0.5
Input Return Loss
0.7
0.9
1.2
0.5
Output Return Loss
0.7
0.9
1.2
Reverse Isolation
0.9
0.5
Output Power @1 dB compression
0.7
0.9
1.2
0.5
—
Output IP3
0.7
—
0.9
42.0
1.2
—
0.5
Noise Figure
0.7
0.9
1.2
Device Operating Voltage (V_d)
4.8
Device Operating Current
110
Device Current Variation vs. Temperature⁽²⁾
Device Current Variation vs Voltage
Thermal Resistance, junction-to-ground lead
(1) _{Measured on Mini-Circuits Characterization test board TB-640+. See Characterization Test Circuit (Fig. 1)}
(2) _{Current at 85°C —­ Current at -45°C)/130}
HXG-122+
Typ.
16.0
15.7
15.3
14.5
18.7
15.9
13.2
9.4
14.2
12.1
10.3
8.0
21.0
22.9
23.0
23.3
23.0
43.8
47.0
46.0
40.8
2.1
2.2
2.2
2.2
5.0
146
+14
0.05
85
Max.
1.2
—
—
17.0
—
Units
GHz
dB
dB
dB
dB
dBm
—
—
dBm
—
—
dB
5.2
V
180
mA
µA/°C
mA/mV
°C/W
Absolute Maximum Ratings
LSL
DC Current Histogram
USL
Parameter
Ratings
Operating Temperature (ground lead)
-40°C to 85°C
Storage Temperature
-65°C to 150°C
Operating Current at 5V
210 mA
Power Dissipation
1W
Input Power (CW)
24 dBm
DC Voltage on Pin 3
6V
Note:
Permanent damage may occur if any of these limits are exceeded.
Electrical maximum ratings are not intended for continuous normal operation.
DC Current (mA)
LSL=Lower Spec Limit
USL=Upper Spec Limit
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
Page 3 of 4