MNA-2A Datasheet, PDF (2/5 Pages) Mini-Circuits – Monolithic Amplifier

High Directivity
Monolithic Amplifier
0.5-2.5 GHz
Product Features
• Choice of supply voltage, +2.8V to +5V
• Micro-miniature size .120”X.120”
• Internal DC blocking at RF input and output
• High directivity, +22 dB typ. at 2 GHz and 5V
• Output power, +17.9 dBm typ. at 2 GHz and 5V
• Aqueous washable
Typical Applications
• Buffer amplifier
• Cellular infrastructure
• Communications satellite
• Defense
MNA-2A+
CASE STYLE: DQ849
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
General Description
MNA-2A+ is a wideband PHEMT based MMIC amplifier with high active Directivity. MNA integrates the entire
matching network and majority of the bias circuit inside the package, reducing the need for complicated exter-
nal circuits. This approach makes the MNA amplifier extremely straightforward to use. This design operates
on a single +2.8 to +5V supply, is well matched for 50Ω and comes in a tiny, low profile 3x3mm 8-lead MCLP
package accommodating dense circuit board layouts.
simplified schematic and pad description
Function
Pad
Number
Description (See Fig 1)
RF IN
2
RF input pin
RF-OUT
5
RF output pin
DC
7,8
DC Bias pads 7,8. Pad 7 connected to ground via 1000 pF. Pad 8 connected to pad 7 via 33 ohms.
NC
1,3,4,6
Not Connected, connect pad 3 and 4 to ground externally
GND
Paddle
Ground
Notes
A. Performance
O_anP_dT_qI_uO_alN_ityA_aL_ttributes
and
cond¹it^,io⁶ns
not
expre^Nss^olyⁱⁿst^ta^et^reⁿd^ain^l
c_tho_isn_sn_pe_ec_cit_fi_ico_an_ti;_or_ne_dc_oo_cm_umm_ee_ntn_ad_reed_intu_ens_de_e:_dp_te_o r_beP_eC_xB_cluL_da_edyo_au_ndt
P_doL_n-0_ot7_f8_orm
a
part
of
this
specification
document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
REV. OR
M152175
MNA-2A+
151203
Page 2 of 5