YSF-382 Datasheet, PDF (1/5 Pages) Mini-Circuits – Flat Gain Amplifier

™
Mini-Circuits System In Package
Flat Gain Amplifier
YSF-382+
The Big Deal:
• Excellent Combination of gain,
P1dB, IP3 and NF
• Flat Gain Response:
± 0.9 dB over 3300-3800 MHz
• 50Ω Input and Output:
no External Components Required
CASE STYLE: DL1020
Product Overview:
™
YSF-382+ is an advanced amplifier module in a Mini-Circuits System In Package . This module is fully
matched to 50Ω in/out impedance and has built-in Input & Output DC block capacitors. It is enclosed in a
5 x 6 mm MCLP plastic package. The YSF-382+ uses E-PHEMT technology enabling it to work with a
single positive supply voltage.
Key Features
Feature
Gain Flatness ± 0.9dB
Medium Gain: 15dB
Strong Combination of Performance
Integrated Matching, DC Blocking and
Bias in Small Package
Excellent Return Loss
High Reverse Isolation
Advantages
The YSF-382+ provides outstanding gain flatness over the full International WIMAX
communications band (3300-3800 MHz) making this ideal for use in applications
where gain-flatness and repeatability are critical performance requirements.
The YSF-382+ is a two-stage design with internal feedback and bias to provide flat
15 dB nominal gain, supporting applications where a single gain block must overcome
large system losses such as long cable runs and lossy components.
The YSF-382+ provides a strong combination of performance parameters including
high gain (15 dB), high IP3 (+36 dBm) and P1dB (+20 dBm) and low noise figures (2.5
dB) that are difficult to achieve in a single stage design and available only in the YSF
amplifier series.
The YSF-382+ includes all support circuits including: Matching, Bias and DC Block-
ing, all integrated into a single 5x6mm package making the total footprint equal to or
smaller than most solutions.
The YSF-382+ includes integrated input and output matching and bias circuits to
make this amplifier a simple, complete drop-in solution. The matching circuits provide
good output return loss (11dB), and are designed to give optimal P1dB and IP3 per-
formance in a 50Ω environment.
With 28 dB of reverse isolation – the YSF-382+ is an ideal gain block for use in inte-
grated systems to minimize VSWR interactions resulting from cascading highly reflec-
tive components such as sharp filters.
Mini-Circuits^®
ISO 9001 ISO 14001 AS 9100 CERTIFIED
P.O. Box 350166, Brooklyn, New York 11235-0003 [phone] Fax [phone] The Design Engineers Search Engine
For detailed performance specs
& shopping online see web site
® _{Provides ACTUAL Data Instantly at minicircuits.com}
IF/RF MICROWAVE COMPONENTS
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
Page 1