English
Language : 

YSF-272 Datasheet, PDF (1/5 Pages) Mini-Circuits – Flat Gain Amplifier
™
Mini-Circuits System In Package
Flat Gain Amplifier
YSF-272+
The Big Deal:
• Ultra Flat Gain Response:
± 0.7 dB over 2300-2700 MHz
• Excellent Combination of gain,
P1dB, IP3 and NF
• 50Ω Input and Output:
no External Components Required
CASE STYLE: DL1020
Product Overview:
™
YSF-272+ is an advanced amplifier module in a Mini-Circuits System In Package . This module is fully
matched to 50Ω in/out impedance and has built-in Input & Output DC block capacitors. It is enclosed in a
5 x 6 mm MCLP plastic package. The YSF-272+ uses E-PHEMT technology enabling it to work with a
single positive supply voltage.
Key Features
Feature
Superior Gain Flatness ± 0.7dB
High Gain
Strong Combination of Performance
Integrated Matching, DC Blocking and
Bias in Small Package
Excellent Return Loss
High Reverse Isolation
Advantages
The YSF-272+ provides industry leading gain flatness over the 2GHz Wimax and
UMTS bands (2.3,2.5 and 2.5 to 2.7GHz) making this ideal for use in applications
where gain-flatness and repeatability are critical performance requirements.
The YSF-272+ is a two-stage design with internal feedback and bias to provide flat
20 dB nominal gain, supporting applications where a single gain block must overcome
large system losses such as long cable runs and lossy components.
The YSF-272+ provides a strong combination of performance parameters including
high gain (20 dB), high IP3 (+35 dBm) and P1dB (+20 dBm) and low noise figures (2.4
dB) that are difficult to achieve in a single stage design and available only in the YSF
amplifier series.
The YSF-272+ includes all support circuits including: Matching, Bias and DC Block-
ing, all integrated into a single 5x6mm package making the total footprint equal to or
smaller than most solutions.
The YSF-272+ includes integrated input and output matching and bias circuits to
make this amplifier a simple, complete drop-in solution. The matching circuits provide
excellent output return loss (20dB), and are designed to give optimal P1dB and IP3
performance in a 50Ω environment.
With 30 dB of reverse isolation – the YSF-272+ is an ideal gain block for use in inte-
grated systems to minimize VSWR interactions resulting from cascading highly reflec-
tive components such as sharp filters.
Mini-Circuits®
ISO 9001 ISO 14001 AS 9100 CERTIFIED
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine
For detailed performance specs
& shopping online see web site
® Provides ACTUAL Data Instantly at minicircuits.com
IF/RF MICROWAVE COMPONENTS
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
Page 1