PMA4-33GLN Datasheet, PDF (1/5 Pages) Mini-Circuits – Monolithic Amplifier

Low Noise, High Gain & IP3
Monolithic Amplifier
50Ω 0.7 to 3.0 GHz
PMA4-33GLN+
The Big Deal
• Low noise figure, 0.47 dB typ. @ 900 MHz
• High gain, 39 dB typ. @900 MHz
• High OIP3, +40 dBm typ. at 900 MHz
4mm x 4mm
Product Overview
Mini-Circuits PMA4-33GLN+ is an E-PHEMT based, low noise, dual chip, MMIC amplifier with a unique
combination of low noise, high gain and high IP3, making this amplifier ideal for sensitive, high-dynamic-
range receiver applications. This design operates on a single 5V supply, is well matched for 50Ω systems,
and comes in a 4mm x 4mm, low-profile package accommodating dense circuit board layouts.
Key Features
Feature
Low noise, 0.47 dB at 0.9 GHz
High Gain
• 38.9 dB at 900 MHz
• 26.9 dB at 2000 MHz
High IP3
• +40.4 dBm at 0.9 GHz
• +40.2 dBm at 2 GHz
High max input power
• +24 dBm
4 x 4mm 16-lead MCLP package
High reliability
Advantages
Enables lower system noise figure performance
High gain with low noise minimizes the effect of noise figure reduction resulting from
cascading of multiple stages and simplifies circuit design.
Combination of low noise and high IP3 makes this MMIC amplifier ideal for use in low
noise receiver front end (RFE) as it gives the user advantages of sensitivity & two-tone
IM performance at both ends of the dynamic range.
Ruggedized design provides high power handling for input powers common at receiver
inputs, eliminating the need for an external limiter in most cases.
Provides low inductance, repeatable transitions, and excellent thermal contact to PCB
Low signal operating current of 154 mA nominal maintains junction temperatures typi-
cally below 103°C at 85°C ground lead temperature.
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
Page 1 of 5