PMA-5455_15 Datasheet, PDF (1/6 Pages) Mini-Circuits – Monolithic Amplifier

Low Noise, High IP3
Monolithic Amplifier
50Ω 0.05 to 6 GHz
PMA-5455+
The Big Deal
• Ultra Low Noise Figure, 0.8 dB
• High IP3/Low Current, 40mA
• Wideband, up to 6 GHz
3mm x 3mm MCLP (EIA: QFN) Pkg
Product Overview
Mini-Circuits PMA-5455+ is a E-PHEMT based Ultra-Low Noise MMIC Amplifier operating from 50 MHz to 6
GHz with a unique combination of low noise and high IP3 making this amplifier ideal for sensitive receiver ap-
plications. This design operates on a single 5V supply at only 40 mA and is internally matched to 50 Ohms.
Key Features
Feature
Ultra Low Noise, 0.8 dB
Advantages
Outstanding Noise Figure, measured in a 50 Ohm environment without any external matching
High IP3, 31 dBm
Low Current, 40 mA
Broad Band
Internally Matched
MCLP Package
Max Input Power, +20 dBm
High Reliability
Combining Low Noise and High IP3 makes this MMIC amplifier ideal for Low Noise
Receiver Front End (RFE) because it gives the user advantages at both ends of the dynamic
range: sensitivity & two-tone spur-free dynamic range
At only 40mA, the PMA-5455+ is ideal for remote applications with limited available power or
densely packed applications where thermal management is critical.
Operating over a broadband the PMA-5455+ covers the primary wireless communications bands:
Cellular, PCS, LTE, WiMAX
No external matching elements required to achieve the advertised noise and output power over the
full band
Low Inductance, repeatable transitions, excellent thermal pad
Ruggedized design operates up to input powers of +20 dBm without the need of an external limiter
Low, small signal operating current of 40mA nominal maintains junction temperatures typically
below 110°C at 85°C ground lead temperature
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
Page 1 of 6