PHA-1H Datasheet, PDF (1/6 Pages) Mini-Circuits – Monolithic Amplifier

Ultra High Dynamic Range
Monolithic Amplifier
50Ω 0.05 to 6 GHz
PHA-1H+
The Big Deal
• Ultra High IP3
• Broadband High Dynamic Range without
external Matching Components
• Operates to 105°C
• May be used as a replacement to WJ AH1^a,b
SOT-89 PACKAGE
Product Overview
PHA-1H+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology and
offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition,
the PHA-1H+, unlike competitive models, has good input and output return loss over a broad frequency
range without the need for external matching components and has demonstrated excellent reliability. Lead
finish is SnAgNi. It has repeatable performance from lot to lot and is enclosed in a SOT-89 package for very
good thermal performance.
Key Features
Feature
Broad Band: 0.05 to 6.0 GHz
Extremely High IP3
Versus DC power Consumption
40.4 dBm typical at 2.4 GHz
No External Matching Components
Required
Advantages
Broadband covering primary wireless communications bands:
Cellular, PCS, LTE, WiMAX
The PHA-1H+ matches industry leading IP3 performance relative to device size and
power consumption. The combination of the design and E-PHEMT Structure provides
enhanced linearity over a broad frequency range as evidence in the IP3 being typically
20 dB above the P 1dB point. This feature makes this amplifier ideal for use in:
• Driver amplifiers for complex waveform up converter paths
• Drivers in linearized transmit systems
• Secondary amplifiers in ultra High Dynamic range receivers
Unlike competing products, Mini-Circuits PHA-1H+ provides Input and Output Return Loss of
10-23 dB up to 4 GHz without the need for any external matching components
Low Noise Figure: 2.6dB typ. up to 4 GHz
3.4dB typ. up to 6 GHz
A unique feature of the PHA-1H+ which separates this design from all competitors is the
low noise figure performance in combination with the high dynamic range.
Low Juction Temperature
Tj=115°C at 85°C lead temperature and
135°C at 105°C lead temperature
Results in excellent reliability.
Notes:
a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical
performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses.
b. The WJ AH1 part number is used for identification and comparison purposes only.
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
Page 1 of 6