PGA-105 Datasheet, PDF (1/5 Pages) Mini-Circuits – Monolithic Amplifier

Ultra Flat Gain, Low Noise/High Dynamic Range
Monolithic Amplifier
50Ω 0.04 to 2.6 GHz
The Big Deal
• Ultra Flat Gain
• Low Noise, High Dynamic Range
• Excellent Input and Output Return Loss
without use of external matching components
PGA-105+
SOT-89 PACKAGE
Product Overview
PGA-105+ (RoHS compliant) is an advanced ultra flat gain amplifier fabricated using E-PHEMT technology
and offers extremely high dynamic range over a broad frequency range and with low noise figure. In
addition, the PGA-105+ has good input and output return loss over a broad frequency range without the
need for external matching components. Lead finish is SnAgNi and is enclosed in a SOT-89 package for
good thermal performance.
Key Features
Feature
Broad Band: 0.04 to 2.6 GHz
Advantages
Broadband covering primary wireless communications bands:
Cellular, PCS, LTE, WiMAX
Ultra Flat Gain: ↑
±0.25 dB typ. 0.1 to 2 GHz
Ideal for use in broad band or multi band applications where gain flatness is critical.
High IP3 Versus DC power Consumption:
39 dBm typical at 0.9 GHz
35 dBm typical at 2 GHz
No External Matching Components
Required
The PGA-105+ provides good IP3 performance relative to device size and power con-
sumption. The combination of the design and E-PHEMT Structure provides enhanced
linearity over a broad frequency range as evidence in the IP3 being typically 15 dB
above the P 1dB point. This feature makes this amplifier ideal for use in:
• Driver amplifiers for complex waveform up converter paths
• Drivers in linearized transmit systems
• Secondary amplifiers in ultra High Dynamic range receivers
Unlike competing products, Mini-Circuits PGA-105+ provides outstanding gain flatness
and Input and Output Return Loss of 23 dB up to 2.6 GHz without the need for any external
matching components.
Low Noise Figure:
1.7 - 2.0 dB typ.
A unique feature of the PGA-105+ which separates this design from all competitors is
the low noise figure performance in combination with the high dynamic range.
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
Page 1 of 5