GVA-63 Datasheet, PDF (1/5 Pages) Mini-Circuits – Monolithic Amplifier

High Gain, High IP3
Monolithic Amplifier
50Ω 0.01 to 6 GHz
The Big Deal
• High Gain
• Broadband High Dynamic Range without
external Matching Components
• May be used as a replacement to RFMD SBB5089Z^a,b
GVA-63+
SOT-89 PACKAGE
Product Overview
GVA-63+ (RoHS compliant) is an wideband amplifier fabricated using InGap HBT technology and offers
high gain over a broad frequency range and with high IP3. In addition, the GVA-63+, has good input and
output return loss over a broad frequency range without the need for external matching components and
has demonstrated excellent reliability. Lead finish is SnAgNi. It has repeatable performance from lot to lot
and is enclosed in a SOT-89 package for very good thermal performance.
Key Features
Feature
Broad Band: 0.01 to 6.0 GHz
Advantages
Broadband covering primary wireless communications bands:
Cellular, PCS, LTE, WiMAX
Flat gain
High gain reduces number of gain stages, at lower real estate, component count and
cost. ±1.7 dB from 50 MHz to 3 GHz
High IP3
Versus DC power Consumption
34 dBm typical at 0.05 GHz
35 dBm typical at 0.8 GHz
The GVA-63+ matches industry leading IP3 performance relative to device size and
power consumption. The combination of the design and InGap HBT Structure provides
enhanced linearity over a broad frequency range as evidence in the IP3 being typically
16 dB above the P 1dB point to 0.8 GHz. This feature makes this amplifier ideal for use
in:
• Driver amplifiers for complex waveform up converter paths
• Drivers in linearized transmit systems
No External Matching Components
Required
GVA-63+ provides Input and Output Return Loss of 12-25 dB up to 6 GHz without the need
for any external matching components
Notes:
a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical
performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses.
b. The RFMD SBB-5089Z part number is used for identification and comparison purposes only.
* X-parameters is a registered trademark of Agilent Technologies, Inc. The X-parameters format and underlying equations are open and documented.
For more information, refer to X-parameters Open Documentation, Trademark Usage & Partnerships
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
Page 1 of 4