GALI-S66 Datasheet, PDF (1/4 Pages) Mini-Circuits – Monolithic Amplifier DC-3 GHz

Surface Mount
Monolithic Amplifier _{DC-3 GHz}
Features
• Miniature SOT-89 package
• Low noise figure, 2.4 dB typ.
• Internally Matched to 50 Ohms
• Wide bandwidth, DC to 3 GHz
• Excellent package for heat dissipation, exposed metal bottom
• Low thermal resistance for high reliability
• Aqueous washable
Applications
• Cellular
• PCS
• Communication receivers & transmitters
Gali S66+
CASE STYLE: DF782
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
General Description
Gali S66+ (RoHS compliant) is a wideband amplifier offering high dynamic range. Lead finish is SnAgNi. It
has repeatable performance from lot to lot, and is enclosed in a SOT-89 package. It uses Darlington con-
figuration and is designed to be rugged for ESD.
simplified schematic and pin description
RF-OUT and DC-IN
RF IN
GROUND
3 RF-OUT & DC-IN
4
2 GROUND
1 RF-IN
Function
RF IN
RF-OUT and DC-IN
GND
Pin Number
1
3
2,4
Description
RF input pin. This pin requires the use of an external DC blocking capacitor chosen
for the frequency of operation.
RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking
capacitor is necessary for proper operation. An RF choke is needed to feed DC bias
without loss of RF signal due to the bias connection, as shown in “Recommended
Application Circuit”.
Connections to ground. Use via holes as shown in “Suggested Layout for PCB
Design” to reduce ground path inductance for best performance.
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
REV. G
M151107
EE-8572/B
GALI-S66+
RS/YB/FL
150723
Page 1 of 4