DG03-170A Datasheet, PDF (1/2 Pages) Mini-Circuits – MONOLITHIC AMPLIFIERS

MONOLITHIC AMPLIFIERS
50Ω
BROADBAND DC to 8 GHz
NEW!
LEE
low power, up to +10.9 dBm output
J
FREQ.
u ^GHz
MODEL
NO.
f - f 0.1
LU
GAIN , dB Typical
over frequency, GHz
1 2 4 5 8 10
LEE-19
DC-8 12.1 12.0 12.1 12.0 11.6 10.6 9.0
LEE-29
DC-8 15.5 15.4 15.4 14.9 14.1 12.5 10.6
LEE-39
DC-8 21.9 21.4 20.8 18.3 16.6 13.5 10.5
all specifications at 25°C
Min.@
2GHz
9.6
13.3
18.5
MAXIMUM DYNAMIC
VSWR
MAX.
DC
THERMAL CASE
POWER (dBm) RANGE
(:1)
Typ.
CURRENT OPERATING
RATING²
POWER³
RESIS- STYLE
TANCE⁴
at Pin 3
Output
(1 dB
Input
NF
IP3
In
Out
Device
θjc
Comp.) ^{(no (dB) (dBm) DC-3 3-f}U^{** DC-3 3-f}U^{** I}
Current
Volt.
Typ.
2GHz f dmg) Typ. Typ. GHz GHz GHz GHz (mA) (mA) Typ Min Max °C/W Note B
U
C
O
PRICE
N$
N
E
C
T
I
O
Qty.
N (30)
10.2 11.3 15 6.5 24.5 1.5 1.2 1.4 1.8 55
40 3.6 3.2 4.0 322 FG873 cb 1.19
10.9 11.3 15 5.5 25.5 1.4 1.3 1.3 1.6 55
40 3.6 3.2 4.0 334 FG873 cb 1.19
10.4 11.3 13 4.5 23.4 1.3 1.4 1.3 1.6 55
35 3.5 3.1 3.9 321 FG873 cb 1.19
see suggested PCB layout PL-126 for LEE models
features
• frequency range, DC to 8 GHz useable to 10 GHz
• up to 17.3 dBm typ. output power
• excellent package for heat dissipation, exposed
metal bottom
• flat output power to 10 GHz (LEE-19,-29,-39)
absolute maximum ratings
operating temperature: -45°C to 85°C
storage temperature: -65°C to 150°C
model identification
Model
marking^‡
LEE-19
19
LEE-29
29
LEE-39
39
LEE-49
49
LEE-59
59
‡_{Prefix letter (optional) designates assembly location.}
Suffix letters (optional) are for wafer identification.
———
prefix letter
number
suffix letter
NOTES:
u Aqueous washable
** f_u is the upper frequency limit for each model as shown in the table.
J Low frequency cutoff determined by external coupling capacitors.
A. Environmental specifications and re-flow soldering information
available in General Information Section.
1,000
MTTF vs. Junction Temp.
(LEE-19,-29,-39,-49,-59)
B. Units are non-hermetic unless otherwise noted. For details on case
dimensions & finishes see “Case Styles & Outline Drawings”.
C. Prices and Specifications subject to change without notice.
100
D. For Quality Control Procedures see Table of Contents, Section 0,
"Mini-Circuits Guarantees Quality" article. For Environmental
Specifications see Amplifier Selection Guide.
10
1. Model number designated by alphanumeric code marking.
2. Permanent damage may occur if any of these limits are exceeded.
These ratings are not intended for continuous normal operation.
3. Supply voltage must be connected to pin 3 through a bias connector in
order to prevent damage. See "Biasing MMIC Amplifiers" in Mini-
1
140
160
180
200
220
circuits.com/application.html Reliability predictions and normal
Junction Temp (˚C)
operating conditions are applicable at current specified.
4. Thermal resistance θjc is from hottest junction in device to mounting
surface of leads.
170A
Mini-Circuits^®
INTERNET http://www.minicircuits.com
P.O. Box 350166, Brooklyn, New York 11235-0003 [phone] Fax [phone]
Distribution Centers NORTH AMERICA 800-654-7949 • 417-335-5935 • Fax [phone] • EUROPE 44-1252-832600 • Fax [phone]
ISO 9001 CERTIFIED