CMA-162LN Datasheet, PDF (1/6 Pages) Mini-Circuits – Monolithic Amplifier

Ultra Low Noise, High IP3
Monolithic Amplifier
50Ω 0.7 to 1.6 GHz
The Big Deal
• Ceramic, Hermetically Sealed, Nitrogen filled
• Low profile case, .045” high
• Ultra Low Noise Figure, 0.5 dB
• High Gain, High IP3
• Class 1B HBM ESD (500V)
CMA-162LN+
CASE STYLE: DL1721
Product Overview
Mini-Circuits CMA-162LN+ is a E-PHEMT based Ultra-Low Noise MMIC Amplifier with a unique combina-
tions of low noise and high IP3 making this amplifier ideal for sensitive high dynamic range receiver applica-
tions. This design operates on a single 4V supply. The MMIC amplifier is bonded to a multilayer integrated
LTCC substrate and then hermetically sealed under a controlled nitrogen atmosphere with gold-plated
covers and eutectic AuSn solder. These amplifiers have been tested to MIL requirements for gross leak,
fine leak, thermal shock, vibration, acceleration, mechanical shock, and HTOL.
Key Features
Feature
Ultra Low Noise, 0.5 dB at 1.0 GHz
High IP3, +30 dBm at 1.0 GHz
Adjustable Gain
Ceramic Hermetic Package
Max Input Power, +25 dBm
High Reliability
Class 1B ESD (500V HBM)
Advantages
Outstanding world class noise figure performance.
Combining Low Noise and High IP3 makes this MMIC amplifier ideal for use in Low
Noise Receiver Front End (RFE) as it gives the user advantages at both ends of the
dynamic range: sensitivity & two-tone IM performance.
By changing feedback resistor R1, gain can be changed from19.7 to 23.5 dB at 1GHz
Low inductance, repeatable performance, excellent reliability
Ruggedized design operates up to high input powers often seen at Receiver inputs
eliminating the need for an external resistor.
Low, small signal operating current of 55 mA nominal maintains junction temperatures
typically below 100°C at 85°C ground lead temperature.
The CMA-162LN+ is a super low noise PHEMT based design. Mini-Circuits incorpo-
rates ESD protection on die to achieve industry leading ESD performance for a low
noise amplifier.
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
Page 1 of 6